![]() |
I apologize Dmitry, my english in not very great. HylaFAX can't connect properly with fax on the +49 8331 8558 11 but others faxmachines sending fax with no problems. HylaFAX Version 4.0pl2 under Linux RedHat 6.1 Kernel 2.2.12-20 modem Multitech MT932BA I've been trying to modify the file /var/spool/fax/etc/config.ttyS1 a) Use2D: no b) Class2DDISCmd: AT+FDIS c) ModemRate: 9600 d) initialization for the modem out of the box: AT&F, ATS38=35, AT&F9, AT&W0 but each sendig hangs with Unspecified Transmit Phase B error (code 20) The log show: ------------- Sep 15 01:09:29.78: [ 1660]: <-- [19:ATDT00498331855811\r] Sep 15 01:09:50.74: [ 1660]: --> [5:+FCON] Sep 15 01:09:53.96: [ 1660]: --> [78:+FNSF:00 00 25 01 4E 45 47 4E 49 4D 4D 45 4D 20 48 42 4D 47 20 41 43 45 54 53 ] Sep 15 01:09:53.96: [ 1660]: REMOTE NSF "00 00 25 01 4E 45 47 4E 49 4D 4D 45 4D 20 48 42 4D 47 20 41 43 45 54 53" Sep 15 01:09:53.96: [ 1660]: --> [28:+FCSI:" +49 8331 855811"] Sep 15 01:09:53.96: [ 1660]: REMOTE CSI "+49 8331 855811" Sep 15 01:09:53.96: [ 1660]: --> [6:+FDIS:] Sep 15 01:09:53.96: [ 1660]: MODEM protocol botch, can not parse "" Sep 15 01:09:53.96: [ 1660]: --> [2:OK] Sep 15 01:09:53.96: [ 1660]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20) Sep 15 01:09:53.96: [ 1660]: SEND FAILED: Unspecified Transmit Phase B error Sep 15 01:09:53.96: [ 1660]: SEND FAILED: Unspecified Transmit Phase B error; too many attempts to send Sep 15 01:09:53.96: [ 1660]: <-- [5:ATH0\r] Sep 15 01:09:55.54: [ 1660]: --> [7:+FHNG:2] Sep 15 01:09:55.54: [ 1660]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2) Sep 15 01:09:56.09: [ 1660]: --> [2:OK] Sep 15 01:09:56.09: [ 1660]: SESSION END The file config.ttyS1 show: ---------------------------- CountryCode: 34 AreaCode: FAXNumber: +34.9.6348.0307 LongDistancePrefix: InternationalPrefix: 00 DialStringRules: etc/dialrules.europe ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 0 SpeakerVolume: low GettyArgs: "-h %l dx_%s" LocalIdentifier: "CELSA-EICHHOFF" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%p of %%t" MaxRecvPages: 25 # # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class2 # use class 2 interface ModemRate: 38400 # lock rate for DCE-DTE communication ModemFlowControl: rtscts # default # ModemHardFlowCmd: AT&E4 # hardware flow control ModemSoftFlowCmd: AT&E5 # software flow control ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in class 2 # # NB: some models get confused by the @ # ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence # Class2RecvDataTrigger: "\022" # character sent to modem to start recv The file hfaxd.conf show: ------------------------- LogFacility: daemon # syslog facility (want this 1st)) ServerTracing: 0x001 # just server operation #IdleTimeout: 900 # initial client idle timeout (secs) #MaxIdleTimeout: 7200 # max client idle timeout (secs) #MaxLoginAttempts: 5 # max # login attempts before disconnect #MaxAdminAttempts: 5 # max # admin attempts before disconnect #MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect #FaxContact: FaxMaster # who gets questions/complaints #UserAccessFile: "/etc/hosts" # user+host access control file #ShutdownFile: "/etc/shutdown" # server shutdown control filename #XferLogFile: "/etc/clientlog" # for logging client file transfers #FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process Could you help me? -- __________________________________________________________________________ TECNOGRAMA Servicios Computerizados, S.L. c/ Pintor Sorolla, 15 E-03690 San Vicente del Raspeig Alicante (SPAIN) _________________________________ URL: http://www.tsc.es _________________________________ E-mail: admin@tsc.es Tel: + 34 902 103 132 + 34 9 6567 1981 Fax: + 34 9 6567 1297 __________________________________________________________________________ ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null