HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Help Required !. Class 2 <Rockwell Chipset>

 
----- Original Message -----
Hi,
 
 Please help me,
 
If am trying to configure hylafax for three weeks now. Can't get anywhere.
 
I went through
 
man config
man sendfax
man faxalter
man faxrm
FAQ Hylafax.org
Search Hylafax.org
Mailiing List Search Hylafax.org
 
But in vain.
 
Can somebody help me.
 
I am trying to configure hylafax with hylafax-4.0pl2-3rh5.i386.rpm
 
I have Red Hat 6.2
Kernel 2.2.14-12
 
Hylafax is not dialing to any outside fax machine.
My requirement is only to send faxs.
 
Modem is :
 
D-Link DFM-560E
This modem has a rockwell chipset
 
The modem supports 1 class and 2 class

When the machine starts, It reports the following in var/log/messages :

Sep 14 20:05:26 hostname FaxQueuer[747]: HylaFAX (tm) Version 4.0pl2

Sep 14 20:05:26 hostname FaxQueuer[747]: Copyright (c) 1990-1996 Sam Leffler

Sep 14 20:05:26 hostname FaxQueuer[747]: Copyright (c) 1991-1996 Silicon Graphics, Inc.

Sep 14 20:05:32 hostname FaxGetty[834]: OPEN /dev/ttyS1

Sep 14 20:05:32 hostname FaxGetty[834]: MODEM set DTR OFF

Sep 14 20:05:32 hostname FaxGetty[834]: DELAY 2600 ms

Sep 14 20:05:35 hostname FaxGetty[834]: MODEM set DTR ON

Sep 14 20:05:35 hostname FaxGetty[834]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS

Sep 14 20:05:35 hostname FaxGetty[834]: MODEM flush i/o

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [15:ATE0V1Q0S0=0H0\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [14:ATE0V1Q0S0=0H0]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [12:AT+FCLASS=?\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [9:0,1,2,1.0]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [12:AT+FCLASS=2\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [9:AT+FMFR?\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [20:ROCKWELL ]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [9:AT+FMDL?\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [13:AC/K56^I^I ]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [9:AT+FREV?\r]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [17:V2.210-V90_2M_DLS]

Sep 14 20:05:35 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:35 hostname FaxGetty[834]: <-- [10:AT+FDCC=?\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [9:AT+FCQ=?\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [1:0]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [9:AT+FAP=?\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [5:ERROR]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [10:AT+FSPL=?\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [3:0,1]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [12:AT+FCLASS=2\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [10:AT+FTBC=0\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [10:AT+FBOR=0\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [13:AT+FPHCTO=30\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [10:AT+FBUG=1\r]

Sep 14 20:05:36 hostname FaxGetty[834]: --> [5:ERROR]

Sep 14 20:05:36 hostname FaxGetty[834]: MODEM Command error

Sep 14 20:05:36 hostname FaxGetty[834]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]

Sep 14 20:05:37 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:37 hostname FaxGetty[834]: MODEM ROCKWELL AC/K56/V2.210-V90_2M_DLS

Sep 14 20:05:37 hostname FaxGetty[834]: <-- [7:ATL3M1\r]

Sep 14 20:05:37 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:37 hostname FaxGetty[834]: <-- [9:AT+FCR=1\r]

Sep 14 20:05:37 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:37 hostname FaxGetty[834]: <-- [23:AT+FLID="NothingSetup"\r]

Sep 14 20:05:37 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:37 hostname FaxGetty[834]: <-- [18:AT+FAA=1+FCLASS=0\r]

Sep 14 20:05:37 hostname FaxGetty[834]: --> [2:OK]

Sep 14 20:05:37 hostname FaxGetty[834]: MODEM input buffering disabled

When a job is sent from a client I get the correct message

/var/log/messages

Sep 14 20:06:40 hostname FaxQueuer[747]: SUBMIT JOB 23

When I run the command

"faxsend -m ttyS1 /var/spool/fax/sendq/q23"

I get the following output in my log

Sep 14 20:08:33 hostname FaxGetty[834]: ANSWER: Can not lock modem device

Sep 14 20:09:22 hostname FaxSend[901]: MODEM set DTR OFF

Sep 14 20:09:22 hostname FaxSend[901]: DELAY 2600 ms

Sep 14 20:09:25 hostname FaxSend[901]: MODEM set DTR ON

Sep 14 20:09:25 hostname FaxSend[901]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS

Sep 14 20:09:25 hostname FaxSend[901]: MODEM flush i/o

Sep 14 20:09:25 hostname FaxSend[901]: <-- [15:ATE0V1Q0S0=0H0\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [12:AT+FCLASS=?\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [9:0,1,2,1.0]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [12:AT+FCLASS=2\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [9:AT+FMFR?\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [20:ROCKWELL ]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [9:AT+FMDL?\r]

Sep 14 20:09:25 hostname FaxSend[901]: --> [13:AC/K56^I^I ]

Sep 14 20:09:25 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:25 hostname FaxSend[901]: <-- [9:AT+FREV?\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [17:V2.210-V90_2M_DLS]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [10:AT+FDCC=?\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [9:AT+FCQ=?\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [1:0]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [9:AT+FAP=?\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [5:ERROR]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [10:AT+FSPL=?\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [3:0,1]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [12:AT+FCLASS=2\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [10:AT+FTBC=0\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [10:AT+FBOR=0\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [13:AT+FPHCTO=30\r]

Sep 14 20:09:26 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:26 hostname FaxSend[901]: <-- [10:AT+FBUG=1\r]

Sep 14 20:09:27 hostname FaxSend[901]: --> [5:ERROR]

Sep 14 20:09:27 hostname FaxSend[901]: MODEM Command error

Sep 14 20:09:27 hostname FaxSend[901]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]

Sep 14 20:09:27 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:27 hostname FaxSend[901]: MODEM ROCKWELL AC/K56/V2.210-V90_2M_DLS

Sep 14 20:09:27 hostname FaxSend[901]: <-- [7:ATL3M1\r]

Sep 14 20:09:27 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:27 hostname FaxSend[901]: MODEM input buffering disabled

Sep 14 20:09:46 hostname FaxSend[901]: CAUGHT SIGNAL 2

Sep 14 20:09:46 hostname FaxSend[901]: <-- [5:ATH0\r]

Sep 14 20:09:46 hostname FaxSend[901]: --> [2:OK]

Sep 14 20:09:46 hostname FaxSend[901]: MODEM set DTR OFF

Why do I get this and what should be done. ?

Sep 14 20:09:27 hostname@ FaxSend[901]: MODEM input buffering disabled

The config.ttyS1 file is as follows

# $Id: rockwell,v 1.2 1996/06/24 02:58:40 sam Rel $

#

# HylaFAX Facsimile Software

#

# Copyright (c) 1990-1996 Sam Leffler

# Copyright (c) 1991-1996 Silicon Graphics, Inc.

# HylaFAX is a trademark of Silicon Graphics, Inc.

#

# Permission to use, copy, modify, distribute, and sell this software and

# its documentation for any purpose is hereby granted without fee, provided

# that (i) the above copyright notices and this permission notice appear in

# all copies of the software and related documentation, and (ii) the names of

# Sam Leffler and Silicon Graphics may not be used in any advertising or

# publicity relating to the software without the specific, prior written

# permission of Sam Leffler and Silicon Graphics.

#

# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,

# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY

# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

#

# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR

# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,

# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,

# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF

# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE

# OF THIS SOFTWARE.

#

#

# Configuration for a Rockwell-based modem not otherwise handled by

# another prototype configuration file. This file assumes the modem

# is compatible with the Rc144AC, RC96AC or RC144DP.

#

# This configuration file sets up the modem to run at 38.4 with

# RTS/CTS flow control used by default. XON/XOFF is automatically

# enabled for fax recv. Beware of modems that also lock sending

# to 19.2; add ModemSendBeginCmd: "<19200>" if this is required.

# Also beware that the adaptive-answer facility, when supported,

# is often unreliable.

#

#

CountryCode: 1

AreaCode: 415

FAXNumber: 88888888

LongDistancePrefix: 1

InternationalPrefix: 011

DialStringRules: etc/dialrules

ServerTracing: 0x4f

SessionTracing: 0x4f

RecvFileMode: 0644

LogFileMode: 0644

DeviceMode: 0644

RingsBeforeAnswer: 1

SpeakerVolume: high

GettyArgs: "-h %l %s"

LocalIdentifier: "NothingSetup"

LogFacility: local5

TagLineFont: etc/lutRS18.pcf

TagLineFormat: "From %%l|%c|Page %%p of %%t"

MaxRecvPages: 25

#

#

# Modem-related stuff: should reflect modem command interface

# and hardware connection/cabling (e.g. flow control).

#

ModemType: Class2 # use class 2 interface

ModemRate: 38400

ModemFlowControl: rtscts # default

#

#ModemResetCmds: AT&F2 # what you want for a Supra

ModemNoFlowCmd: AT&K # disable flow control cmd

ModemHardFlowCmd: AT&K3 # hardware flow control cmd

ModemSoftFlowCmd: AT&K4 # software flow control cmd

ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset

#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this

ModemSetupDCDCmd: AT&C1 # DCD follows carrier

ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class

#

ModemSendFillOrder: LSB2MSB # as expected

ModemRecvFillOrder: MSB2LSB # opposite of what makes sense

#

ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive

#

# Caller ID configuration setup for Supra.

#

#QualifyCID: etc/cid # CID access control list file

#CIDNumber: "NMBR = " # pattern string for phone number info

#CIDName: "NAME = " # pattern string for identity info

 
 
Please Help.
 
regards
 
Anil
 

Project hosted by iFAX Solutions