![]() |
Edwin Ramirez <ramirez@doc.mssm.edu> writes: > Thank you for your reply. I added the ModemResetCmds: "ATZ" command to the configuration file, but it > generates an error. Faxgetty reports: unable to initialize modem. Too bad. The log is required (extract it from /var/log/daemon.log) > The ATZ command in the configuration file as: ModemSoftResetCmd: ATZ, but it does not seem to be > invoked. Yes, ModemSoftResetCmd works as expected only in the latest CVS version (earlier versions do not use it). > -ESR- > > Dmitry Bely wrote: > > > Edwin Ramirez <ramirez@doc.mssm.edu> writes: > > > > > I have configured hylafax on a Linux RedHat 6.0 system. I am able > > > to do everything as described in the setup document. However, when > > > sending faxes the following error is reported: > > > > > > SEND FAILED: COMREC invalid command received/no DIS or DTC > > > > > > Does anyone know what this is about? I've include the session trace at > > > the end. > > > > > > Thanks, > > > Edwin S. Ramirez > > > --------------------------------------------------------------------------------------- > > > > > > Aug 25 09:27:31.63: [31772]: SESSION BEGIN 00000026 141544925 > > [...] > > > Aug 25 09:27:35.80: [31772]: DIAL 44925 > > > Aug 25 09:27:35.80: [31772]: <-- [11:ATDT44925@\r] > > > Aug 25 09:28:00.34: [31772]: --> [5:+FCON] > > > Aug 25 09:28:02.28: [31772]: --> [8:+FHNG:23] > > > Aug 25 09:28:02.28: [31772]: REMOTE HANGUP: COMREC invalid command received/no D IS or DTC (code 23) > > > > Your modems's firmware cannot establisth fax connection and reports the > > above error. You can neither adjust anything (except maybe TX level, if > > your modem is capable of doing that) nor fix it at the software > > level. That's Class2 :-) But ... I see that your modem is not properly > > reset. Try > > ModemResetCmds: "ATZ" > > in your config (wont't be necessary for the newer CVS version). Have you > > also tried to call other fax machines? Hope to hear from you soon, Dmitry ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null