HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Incoming faxes too short



Dear HylaFAX users,

I am using the HylaFax package which comes with the SuSE Linux 
6.4 update (v4.1beta2 - SuSE build 135) and libtiff 3.4.

My modem is "ELSA Microlink Basic" (Class 2.0), config.modem
is from the ELSA website.

Faxes seem to come in without problem:

Aug 01 22:10:34.79: [14740]: SESSION BEGIN 00000232 495323962044
Aug 01 22:10:34.79: [14740]: <-- [4:ATA\r]
Aug 01 22:10:43.53: [14740]: --> [4:+FCO]
Aug 01 22:10:43.53: [14740]: ANSWER: FAX CONNECTION
Aug 01 22:10:43.53: [14740]: MODEM input buffering enabled
Aug 01 22:10:47.44: [14740]: --> [27:+FTI:"      +49 5323 96755"]
Aug 01 22:10:47.44: [14740]: --> [22:+FCS:0,3,0,2,0,0,0,3,0]
Aug 01 22:10:47.44: [14740]: --> [2:OK]
Aug 01 22:10:47.44: [14740]: <-- [7:AT+FDR\r]
Aug 01 22:10:49.33: [14740]: --> [7:CONNECT]
Aug 01 22:10:49.33: [14740]: <-- data [1]
Aug 01 22:11:17.46: [14740]: --> [16:+FPS:1,479,0,0,0]
Aug 01 22:11:18.79: [14740]: --> [6:+FET:2]
Aug 01 22:11:18.79: [14740]: --> [2:OK]
Aug 01 22:11:18.79: [14740]: RECV FAX (00000232): from +49 5323 96755, \
  page 1 in 0:31, INF, 3.85 line/mm, 1-D MR
Aug 01 22:11:18.79: [14740]: RECV FAX (00000232): recvq/fax00177.tif \
  from +49 5323 96755, route to <unspecified>, 1 pages in 0:35
Aug 01 22:11:18.79: [14740]: <-- [7:AT+FDR\r]
Aug 01 22:11:21.83: [14740]: --> [7:+FHS:00]
Aug 01 22:11:21.83: [14740]: RECV FAX: bin/faxrcvd "recvq/fax00177.tif" \
  "modem" "00000232" ""
Aug 01 22:11:22.08: [14740]: SESSION END

But: The resulting TIFF file contains solely the "sender" line,
and the fax is only a few millimetres long, and is not A4.
(See Attachment).

I don't know the reason why. Any hints? With older versions of
HylaFAX and libtiff, all worked well.

Regards,
Gerry


German: (SuSE Linux mailinglist):

Meine eingehenden Faxe sind, obwohl in A4 abgesendet, nur noch wenige
Millimeter lang und enthalten nur die Absenderkennung. Die TIFF-Datei
ist auch sehr klein (siehe ANhang). Ich habe keine AHnung, was da
passiert. Ich verwende das HylaFAX-Package und die beiden TIFF-Packages
vom SuSE-FTP-Server (6.4 Update) in der aktuellen Version. Modem ist
ein Elsa Microlink Basic mit config.modem vom Elsa-Webserver.

Auf dem Stand von SuSE 6.2 hat noch alles funktioniert. Hat jemand
einen Tip?

Tschüß
Gerd

------



-- 
Gerhard Fuellgrabe            Phone: +49.5323.96788   Fax: 962044
Arnikaweg 34                              Mobile: +49.170.3508588
D-38678 Clausthal-Zellerfeld                 E-mail: gerd@harz.de

fax00177.tif




Project hosted by iFAX Solutions