Re: [hylafax-users] DID support (was: list)

[Brandon Drake <brandon.drake@pf.net>]

I would be interested.

Is there a way to use the Caller-ID fax routing capabilities to route  on the last three digits?

Alan Wagner-Krankel wrote:

You can get there from here, but hylafax doesn't support
it (yet) - here's your chance to get your name in lights
(or at least into the hylafax contrib list).

There are two primary parts to the problem:

1) Getting the dialed number from the DID trunk. This part
doesn't exist yet for your setup. In an analog DID, I think
the number is sent simply as after-dialed DTMF - if so,
it's a simple matter of getting the %T modem command to
parse it, and getting hylafax to recognize it.  It
shouldn't be too tough, it's just that no one has
had the setup to test it.

2) Dispatching the fax based on the DID number - been there,
done that.  It's not part of the main distribution, but
I have code for dispatching based on the dialed number
- I get the number via DNIS, with a modem bank that supports
a T-1 trunk.  Search on 'DNIS' in the hylafax archives for
a few more details.

Requests for DID support show up on the list every few
months - it would be a useful addition.  If you're
interested in working on it, let me know.

Thanks,
Alan Wagner-Krankel

>
>
> -----Original Message-----
> From: Brandon Drake [SMTP:brandon.drake@pf.net]
> Sent: Friday, July 28, 2000 2:38 PM
> To:   Jason Bachman
> Cc:   hylafax-users@hylafax.org
> Subject:      Re: [hylafax-users] list
>
> I have the inbound DID ananlog trunk on one modem.
>
> I also have two modems setup for outbound.
>
> The VSI fax server supports this configuration and works well.  The
> only
> problem is that it doesn't have a working web interface.  This is why
> I'm
> still looking for a enterprise fax solution that works.  I've heard
> great
> things about the Hylafax solution.  I was just hoping for support on
> the
> inbound side with my current hardware configuration.
>
> Thanks
>
>
>
> Jason Bachman wrote:
>
>       Well, I have never seen a Modem bank or for that matter a modem that
> supported DID trunks.  Also how many faxes do you plan to have come
> in with
> 1 trunk and 100 numbers?  Are you planning to be able to send faxes
> as well?
> A typical DID installation is 2 to 4 trunks for 20 to 50 numbers.
> But of
> course it all depends on the traffic.  DID's are also tipically
> in-bound
> only.  There are some "two-way" DID configurations but only when they
> are on
> PRI.  I assume that you are fimilar with how DID functions and how
> the
> signaling is controlled.Jason
>
>               -----Original Message-----
>               From: bdrake@dazza.org [ <mailto:bdrake@dazza.org>]On Behalf
> Of Brandon Drake
>               Sent: Friday, July 28, 2000 12:16 PM
>               To: Jason Bachman
>               Cc: hylafax-users@hylafax.org
>               Subject: Re: [hylafax-users] list
>               No PBX.   Just a 2-wire analog trunk with 100 DIDs.  I need
> to route faxes based on the last three digits of the DID.
>
>
>
>               Jason Bachman wrote:
>
>                       Hi Brandon,   As far as DID support,  I would think
> that you would need to terminate the DID trunks into a PBX/Key System
> first,
> then bring out seprate S/L extensions to a bank of modems. One modem
> per DID
> number or a hunt group per DID number if you need multiple modems per
> number. It will result in a rather large bank of modems.  You could
> possibally get away with a modem-bank to connect to the PBX via PRI
> but
> that's getting into some major money.If your PBX has the capibility
> of
> transmitting the DID that was called via CID or ANI... then you could
> send
> calls to a bank of modems and route using CID.  I personally have
> never seen
> DID information transfered via CID on a S/L port before
> though.Another other
> option would be to find a modem bank that accepts DID trunks,
> although I've
> never seen anything like that (but I'm sure it exists somewhere).Good
> luck!
>
>                       -------------------------------
>                       Jason Bachman
>                       Information Systems Manager
>                       Hiestand Supply Company
>                       jabachman@hiestandsupply.com
>
>
>                               -----Original Message-----
>                               From: bdrake@dazza.org [
> <mailto:bdrake@dazza.org>]On Behalf Of Brandon Drake
>                               Sent: Thursday, July 27, 2000 11:50 PM
>                               To: hylafax-users@hylafax.org
>                               Subject: [hylafax-users] list
>                               DID support for incoming faxes ???
>
>                               Any ideas?
>                               --
>                               Brandon Drake
>                               Director of Technology
>                               PF.Net Corporation
>                               360.835.4715 direct
>
>
>               --
>               Brandon Drake
>               Director of Technology
>               PF.Net Corporation
>               360.835.4715 direct
>
>
> --
> Brandon Drake
> Director of Technology
> PF.Net Corporation
> 360.835.4715 direct
>

__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

-- 
Brandon Drake
Director of Technology
PF.Net Corporation
360.835.4715 direct