HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Unspecified Class B transmit error!



Hi,

No faxq runs quit happily at about 17% when trying to send....

I'm not trying to receive faxes using hylafax....

Thanks,

Neil

On Mon, 24 Jul 2000, Bernd Proissl wrote:

> 
> Neil,
> 
> ist faxq running at 99% cpu load when you want to send a fax?
> does receiving faxes work?
> 
> Bernd
> 
> > -----Original Message-----
> > From: hylafax-users-bounce@hylafax.org
> > [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Neil Dean
> > Sent: Monday, July 24, 2000 3:09 PM
> > To: hylafax-users@hylafax.org
> > Subject: [hylafax-users] Unspecified Class B transmit error!
> >
> >
> > Hi,
> >
> > I'm very new to this list and am just setting up hylafax to use as an
> > outgoing fax solution. I currently have SuSE 6.4 and have downloaded the
> > newer version (hylafax-4.1beta2-135) from SuSE's ftp server. I have a
> > diamon supra-express pro 56e external fax/modem which reports as reporting
> > 1,2 and 2.0 fax modes? I have set up hylafax (I think) to use class 2.
> >
> > Hylafax communicates well with WHFC and I can place jobs in the queue etc
> > >from windows. The modem diald up the required number and attempts to
> > connect:
> >
> > The log below is from /var/spool/fax/logs
> >
> > Jul 24 13:39:44.48: [  840]: REMOTE best rate 9600 bit/s
> > Jul 24 13:39:44.48: [  840]: REMOTE max page width 1728 pixels in 215 mm
> > Jul 24 13:39:44.48: [  840]: REMOTE max unlimited page length
> > Jul 24 13:39:44.48: [  840]: REMOTE best vres 7.7 line/mm
> > Jul 24 13:39:44.48: [  840]: REMOTE best format 1-D MR
> > Jul 24 13:39:44.48: [  840]: REMOTE best 20 ms, 10 ms/scanline
> > Jul 24 13:39:44.48: [  840]: USE 9600 bit/s
> > Jul 24 13:39:44.48: [  840]: USE 20 ms, 10 ms/scanline
> > Jul 24 13:39:44.48: [  840]: <-- [5:ATH0\r]
> > Jul 24 13:39:44.74: [  840]: --> [9:+FHNG: 20]
> > Jul 24 13:39:44.74: [  840]: REMOTE HANGUP: Unspecified Transmit Phase B
> > error (
> > code 20)
> > Jul 24 13:39:46.16: [  840]: --> [2:OK]
> > Jul 24 13:39:46.16: [  840]: MODEM set DTR OFF
> > Jul 24 13:39:46.16: [  840]: SESSION END
> >
> > It almost appears (to me) that the remote end doesn't want to communicate!
> > Strange when the same modem works on my laptop from windoze!!
> >
> > Thanks
> >
> > Neil
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> > _______________________
> >  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> > < /dev/null
> >
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions