Re: [hylafax-users] Unspecified Class B transmit error!

[Lee Howard <faxguy@deanox.com>]

Double check your config settings for the modem.

Lee Howard


At 02:09 PM 7/24/00 +0100, Neil Dean wrote:
>Hi,
>
>I'm very new to this list and am just setting up hylafax to use as an
>outgoing fax solution. I currently have SuSE 6.4 and have downloaded the
>newer version (hylafax-4.1beta2-135) from SuSE's ftp server. I have a
>diamon supra-express pro 56e external fax/modem which reports as reporting
>1,2 and 2.0 fax modes? I have set up hylafax (I think) to use class 2. 
>
>Hylafax communicates well with WHFC and I can place jobs in the queue etc
>from windows. The modem diald up the required number and attempts to
>connect:
>
>The log below is from /var/spool/fax/logs
>
>Jul 24 13:39:44.48: [  840]: REMOTE best rate 9600 bit/s
>Jul 24 13:39:44.48: [  840]: REMOTE max page width 1728 pixels in 215 mm
>Jul 24 13:39:44.48: [  840]: REMOTE max unlimited page length
>Jul 24 13:39:44.48: [  840]: REMOTE best vres 7.7 line/mm
>Jul 24 13:39:44.48: [  840]: REMOTE best format 1-D MR
>Jul 24 13:39:44.48: [  840]: REMOTE best 20 ms, 10 ms/scanline
>Jul 24 13:39:44.48: [  840]: USE 9600 bit/s
>Jul 24 13:39:44.48: [  840]: USE 20 ms, 10 ms/scanline
>Jul 24 13:39:44.48: [  840]: <-- [5:ATH0\r]
>Jul 24 13:39:44.74: [  840]: --> [9:+FHNG: 20]
>Jul 24 13:39:44.74: [  840]: REMOTE HANGUP: Unspecified Transmit Phase B
>error (
>code 20)
>Jul 24 13:39:46.16: [  840]: --> [2:OK]
>Jul 24 13:39:46.16: [  840]: MODEM set DTR OFF
>Jul 24 13:39:46.16: [  840]: SESSION END
>
>It almost appears (to me) that the remote end doesn't want to communicate!
>Strange when the same modem works on my laptop from windoze!!
>
>Thanks
>
>Neil




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null