 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Problem: Only top of page (long)
- To: hylafax-users@hylafax.org
- Subject: [hylafax-users] Problem: Only top of page (long)
- From: "Robert W. Kuhn" <robert@vermtech.de>
- Date: Wed, 19 Jul 2000 14:34:55 +0200
Hello, (first sorry for my very bad english, I will do my very best.) I use SuSE6.4 with: hylafax-4.1beta2-135 tiff-3.4-0 libtiff-3.4.final-0 My modem: Elsa Mikrolink 28.8TQV. The problem is that i can only send and recieve the top of the page, that means I get only the tagline (or the half of it) or hhe tagline with zero or 1 or 2 lines, nothing more. Here is a log: ---schnipp--- Jul 19 14:09:10.75: [ 8644]: SESSION BEGIN 00000015 4989244xxxx26 Jul 19 14:09:10.75: [ 8644]: SEND FAX: JOB 11 DEST 089244xxxx26 COMMID 00000015 Jul 19 14:09:10.75: [ 8644]: DELAY 2600 ms Jul 19 14:09:13.35: [ 8644]: <-- [14:ATE0V1Q0S0=0H\r] Jul 19 14:09:13.36: [ 8644]: --> [2:OK] Jul 19 14:09:13.36: [ 8644]: <-- [21:ATS8=2S7=60\Q3&D2&C1\r] Jul 19 14:09:13.37: [ 8644]: --> [2:OK] Jul 19 14:09:13.37: [ 8644]: <-- [14:AT+FCLASS=2.0\r] Jul 19 14:09:13.38: [ 8644]: --> [2:OK] Jul 19 14:09:13.38: [ 8644]: <-- [9:AT+FLO=2\r] Jul 19 14:09:13.39: [ 8644]: --> [2:OK] Jul 19 14:09:13.39: [ 8644]: <-- [9:AT+FPP=0\r] Jul 19 14:09:13.40: [ 8644]: --> [2:OK] Jul 19 14:09:13.40: [ 8644]: <-- [9:AT+FBO=0\r] Jul 19 14:09:13.41: [ 8644]: --> [2:OK] Jul 19 14:09:13.41: [ 8644]: <-- [10:AT+FCT=30\r] Jul 19 14:09:13.42: [ 8644]: --> [2:OK] Jul 19 14:09:13.42: [ 8644]: <-- [15:AT+FNR=1,1,1,1\r] Jul 19 14:09:13.43: [ 8644]: --> [2:OK] Jul 19 14:09:13.43: [ 8644]: <-- [9:AT+FIE=0\r] Jul 19 14:09:13.44: [ 8644]: --> [2:OK] Jul 19 14:09:13.44: [ 8644]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Jul 19 14:09:13.45: [ 8644]: --> [2:OK] Jul 19 14:09:13.45: [ 8644]: <-- [7:ATL2M1\r] Jul 19 14:09:13.46: [ 8644]: --> [2:OK] Jul 19 14:09:13.46: [ 8644]: <-- [14:AT+FCLASS=2.0\r] Jul 19 14:09:13.57: [ 8644]: --> [2:OK] Jul 19 14:09:13.57: [ 8644]: <-- [9:AT+FLO=2\r] Jul 19 14:09:13.68: [ 8644]: --> [2:OK] Jul 19 14:09:13.68: [ 8644]: <-- [9:AT+FPP=0\r] Jul 19 14:09:13.79: [ 8644]: --> [2:OK] Jul 19 14:09:13.79: [ 8644]: <-- [9:AT+FBO=0\r] Jul 19 14:09:13.90: [ 8644]: --> [2:OK] Jul 19 14:09:13.90: [ 8644]: <-- [10:AT+FCT=30\r] Jul 19 14:09:14.01: [ 8644]: --> [2:OK] Jul 19 14:09:14.01: [ 8644]: <-- [15:AT+FNR=1,1,1,1\r] Jul 19 14:09:14.12: [ 8644]: --> [2:OK] Jul 19 14:09:14.12: [ 8644]: <-- [9:AT+FIE=0\r] Jul 19 14:09:14.23: [ 8644]: --> [2:OK] Jul 19 14:09:14.23: [ 8644]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Jul 19 14:09:14.34: [ 8644]: --> [2:OK] Jul 19 14:09:14.34: [ 8644]: <-- [24:AT+FLI="Robert W. Kuhn"\r] Jul 19 14:09:14.46: [ 8644]: --> [2:OK] Jul 19 14:09:14.46: [ 8644]: DIAL 089244xxxx26 Jul 19 14:09:14.46: [ 8644]: <-- [17:ATDT089244xxxx26\r] Jul 19 14:09:26.80: [ 8644]: --> [4:+FCO] Jul 19 14:09:28.65: [ 8644]: --> [27:+FCI:" FAX2MAIL GATEWAY"] Jul 19 14:09:28.65: [ 8644]: REMOTE CSI "FAX2MAIL GATEWAY" Jul 19 14:09:28.65: [ 8644]: REMOTE CSI "FAX2MAIL GATEWAY" Jul 19 14:09:28.65: [ 8644]: --> [20:+FIS:1,5,0,2,1,1,0,0] Jul 19 14:09:28.65: [ 8644]: --> [2:OK] Jul 19 14:09:28.65: [ 8644]: REMOTE best rate 14400 bit/s Jul 19 14:09:28.65: [ 8644]: REMOTE max page width 1728 pixels in 215 mm Jul 19 14:09:28.65: [ 8644]: REMOTE max unlimited page length Jul 19 14:09:28.65: [ 8644]: REMOTE best vres 7.7 line/mm Jul 19 14:09:28.65: [ 8644]: REMOTE best format 2-D MR Jul 19 14:09:28.65: [ 8644]: REMOTE supports T.30 Annex A, ECM Jul 19 14:09:28.65: [ 8644]: REMOTE best 0 ms/scanline Jul 19 14:09:28.65: [ 8644]: USE 14400 bit/s Jul 19 14:09:28.65: [ 8644]: USE 0 ms/scanline Jul 19 14:09:28.65: [ 8644]: SEND file "docq/doc11.ps;01" Jul 19 14:09:28.65: [ 8644]: USE page width 1728 pixels in 215 mm Jul 19 14:09:28.65: [ 8644]: USE unlimited page length Jul 19 14:09:28.65: [ 8644]: USE 7.7 line/mm Jul 19 14:09:28.65: [ 8644]: USE 1-D MR Jul 19 14:09:28.65: [ 8644]: <-- [23:AT+FIS=1,5,0,2,0,0,0,0\r] Jul 19 14:09:28.76: [ 8644]: --> [2:OK] Jul 19 14:09:28.76: [ 8644]: <-- [7:AT+FDT\r] Jul 19 14:09:35.81: [ 8644]: --> [20:+FCS:1,5,0,2,0,0,0,0] Jul 19 14:09:36.12: [ 8644]: --> [7:CONNECT] Jul 19 14:09:36.12: [ 8644]: SEND begin page Jul 19 14:09:36.12: [ 8644]: <-- data [1027] Jul 19 14:09:36.12: [ 8644]: <-- data [1027] Jul 19 14:09:36.12: [ 8644]: <-- data [1030] Jul 19 14:09:36.12: [ 8644]: <-- data [1033] Jul 19 14:09:36.49: [ 8644]: <-- data [963] Jul 19 14:09:36.84: [ 8644]: SENT 5056 bytes of data Jul 19 14:09:36.84: [ 8644]: SEND 1D RTC Jul 19 14:09:36.84: [ 8644]: <-- data [9] Jul 19 14:09:36.84: [ 8644]: SEND end page Jul 19 14:09:36.84: [ 8644]: SEND send EOP (no more pages or documents) Jul 19 14:09:36.84: [ 8644]: <-- data [2] Jul 19 14:09:43.93: [ 8644]: --> [7:+FHS:00] Jul 19 14:09:43.93: [ 8644]: REMOTE HANGUP: Normal and proper end of connection Jul 19 14:09:43.93: [ 8644]: SEND recv MCF (message confirmation) Jul 19 14:09:43.93: [ 8644]: SEND FAX (00000015): FROM root@maschine.vermtech.de Jul 19 14:09:43.93: [ 8644]: SEND FAX (00000015): FROM root@maschine.vermtech.de Jul 19 14:09:43.93: [ 8644]: <-- [4:ATH\r] Jul 19 14:09:45.14: [ 8644]: --> [2:OK] Jul 19 14:09:45.14: [ 8644]: SESSION END ---scnapp--- Here is my config.modem: ---schnipp--- # # Class 2.0 modem configuration for ELSA 33.6 TQV. # # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP # CountryCode: 49 AreaCode: 331 FAXNumber: +49.331.9xxxx41 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0644 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "Robert W. Kuhn" LogFacility: local7 TagLineFont: etc/lutRS18.pcf TagLineFormat: "Von %%l|%c|Seite %%p von %%t" PercentGoodLines: 80 MaxConsecutiveBadLines: 20 MaxRecvPages: 250 ModemPriority: 200 # ModemType: Class2.0 # use this to supply a hint ModemRate: 115200 # max rate for DCE-DTE communication ModemFlowControl: rtscts # XON/XOFF flow control assumed ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) # ModemDialCmd: ATDT%s # # Other possible configuration stuff. The default strings are # shown below. Only those that are different from the defaults # need to be included in the configuration file. # ModemAnswerCmd: ATA # use this to answer phone ModemNoFlowCmd: AT\Q0 ModemHardFlowCmd: AT\Q3 ModemSoftFlowCmd: AT\Q1 ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer # # Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH. # Note that we both turn the speaker on/off and set volume. # ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1" ModemEchoOffCmd: ATE0 # disable command echo ModemVerboseResultsCmd: ATV1 # enable verbose command results ModemResultCodesCmd: ATQ0 # enable result codes ModemOnHookCmd: ATH # place phone on hook (hangup) ModemSoftResetCmd: ATZ # do soft reset of modem ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds ModemRecvFillOrder: LSB2MSB # bit order of received facsimile ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit # # Configuration parameters for Class 2.0 modems. # Class2Cmd: AT+FCLASS=2.0 # command to enter class 2.0 Class2BORCmd: AT+FBO=0 # bit order for phase B/C/D (direct) Class2CQCmd: "" # commands to enable copy quality proc. Class2AbortCmd: AT+FKS # abort session command Class2CQQueryCmd: AT+FCQ=? # query for copy quality capabilities Class2DCCQueryCmd: AT+FCC=? # query for modem capabilities Class2TBCCmd: AT+FPP=0 # setup stream mode Class2CRCmd: AT+FCR=1 # enable capability to receive Class2PHCTOCmd: AT+FCT=30 # set phase C timeout parameter Class2BUGCmd: AT+FBU=1 # enable HDLC frame tracing Class2LIDCmd: AT+FLI # set local identifier command Class2DCCCmd: AT+FCC # set modem capabilities command Class2DISCmd: AT+FIS # set session parameters command Class2DDISCmd: "" # disable pre-dial DIS command hack Class2CIGCmd: AT+FPI # set polling identifier command Class2NRCmd: AT+FNR=1,1,1,1 # setup status reporting command Class2PIECmd: AT+FIE=0 # disable interrupt-enable command Class2PTSCmd: AT+FPS # set post-page status command Class2SPLCmd: AT+FSP # set polling indicator command Class2NFLOCmd: AT+FLO=0 # set no flow control command Class2SFLOCmd: AT+FLO=1 # set software flow control command Class2HFLOCmd: AT+FLO=2 # set hardware flow control command ---schnapp--- Thank you very much - Robert. ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- Prev by Date: [hylafax-users] Receiving incomplete faxes
- Next by Date: Re: [hylafax-users] Problem with TIFF library
- Prev by thread: [hylafax-users] Receiving incomplete faxes
- Next by thread: [hylafax-users] hylafax-v4.0pl2 Build problems
- Index(es):
Project hosted by iFAX Solutions