HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Receiving incomplete faxes



Hi,

I'm experiencing some problems to receive faxes on Hylafax (on
RedHat 6.2). All the received faxes are squeezed vertically and
only the first third of the total height of the document is
received.

This looks very much like a problem described in the HylaFAQ (408).
However, I wasn't able to fix it.

I can send faxes without any troubles, and here is what my log
looks like when I reveive a fax :

Jul 18 17:26:21.03: [  668]: SESSION BEGIN 00000016 4402074933672
Jul 18 17:26:21.03: [  668]: <-- [4:ATA\r]
Jul 18 17:26:25.40: [  668]: --> [3:FAX]
Jul 18 17:26:25.40: [  668]: ANSWER: FAX CONNECTION
Jul 18 17:26:25.40: [  668]: RECV FAX: begin
Jul 18 17:26:31.06: [  668]: --> [5:+FCON]
Jul 18 17:26:32.72: [  668]: --> [29:+FTSI: "                    "]
Jul 18 17:26:32.72: [  668]: REMOTE TSI ""
Jul 18 17:26:33.05: [  668]: --> [22:+FDCS: 0,5,0,0,0,0,0,3]
Jul 18 17:26:33.05: [  668]: REMOTE wants 14400 bit/s
Jul 18 17:26:33.05: [  668]: REMOTE wants page width 1728 pixels in 215 mm
Jul 18 17:26:33.05: [  668]: REMOTE wants A4 page length (297 mm)
Jul 18 17:26:33.05: [  668]: REMOTE wants 3.85 line/mm
Jul 18 17:26:33.05: [  668]: REMOTE wants 1-D MR
Jul 18 17:26:33.16: [  668]: --> [2:OK]
Jul 18 17:26:33.16: [  668]: <-- [7:AT+FDR\r]
Jul 18 17:26:36.10: [  668]: --> [5:+FCFR]
Jul 18 17:26:38.62: [  668]: --> [22:+FDCS: 0,5,0,0,0,0,0,3]
Jul 18 17:26:38.62: [  668]: REMOTE wants 14400 bit/s
Jul 18 17:26:38.62: [  668]: REMOTE wants page width 1728 pixels in 215 mm
Jul 18 17:26:38.62: [  668]: REMOTE wants A4 page length (297 mm)
Jul 18 17:26:38.62: [  668]: REMOTE wants 3.85 line/mm
Jul 18 17:26:38.62: [  668]: REMOTE wants 1-D MR
Jul 18 17:26:38.62: [  668]: --> [7:CONNECT]
Jul 18 17:26:38.62: [  668]: RECV: begin page
Jul 18 17:26:38.62: [  668]: RECV: send trigger 021
Jul 18 17:26:38.62: [  668]: <-- data [1]
Jul 18 17:27:05.93: [  668]: RECV: 422 total lines, 0 bad lines, 0 consecutive bad lines
Jul 18 17:27:05.93: [  668]: --> [17:+FPTS: 1,2219,0,0]
Jul 18 17:27:09.62: [  668]: --> [7:+FET: 2]
Jul 18 17:27:09.62: [  668]: RECV recv EOP (no more pages or documents)
Jul 18 17:27:09.62: [  668]: --> [2:OK]
Jul 18 17:27:09.62: [  668]: RECV send MCF (message confirmation)
Jul 18 17:27:09.62: [  668]: RECV FAX (00000016): from , page 1 in 0:36, A4, 3.85 line/mm, 1-D MR
Jul 18 17:27:09.62: [  668]: RECV FAX (00000016): recvq/fax00011.tif from , route to <unspecified>, 1 pages in 0:44
Jul 18 17:27:09.62: [  668]: <-- [7:AT+FDR\r]
Jul 18 17:27:12.40: [  668]: --> [8:+FHNG: 0]
Jul 18 17:27:12.40: [  668]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jul 18 17:27:12.40: [  668]: RECV FAX: bin/faxrcvd "recvq/fax00011.tif" "modem" "00000016" ""
Jul 18 17:27:12.57: [  668]: RECV FAX: end
Jul 18 17:27:12.57: [  668]: SESSION END

Thanks,

	Seb

_____________________________________________________________
Sebastien GUILLEMIN
mailto:mrlem@wanadoo.fr


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions