HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: Unable To Receive Faxes



My guess is that your config file isn't 100% right.  To verify this, open
up minicom (you'll have to disable the hylafax daemons) and send the
command 'AT+FTH=3', and if you get (as I believe you will with a USR modem)
'ERROR'.  I think that you're probably using a Class 1 config file, so I
don't have any experience there to tell you what the correct setting is,
though.

Lee Howard

At 07:34 AM 7/10/00 -0400, Greg Kelley wrote:
>We are unable to receive faxes - seems to be the modem setup.  Using HylaFAX
>v4.0p12 for RedHat Linux v6.2 with libtiff v3.4.  USR Sportster 33.6 modem
>on ttyS1 set up for Class 1.  Any insights would be appreciated - thanks.
>
>Messages log always shows "MODEM /" after the Open ttyS1 line as if there
>was nothing to initialize the modem with.  The following log repeats the
>[9:AT+FTH=3\r] part 4 times and times out.
....



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions