RE: flexfax: Trouble receiving Faxes with Elsa Microlink 56k Basic Modem

["Bernd Proissl" <news@proissl.de>]

http://www.hylafax.org/archive/2000-05/msg00218.php
http://www.hylafax.org/archive/2000-04/msg00313.php


> -----Original Message-----
> From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com]On
> Behalf Of Karlheinz Blank
> Sent: Thursday, May 25, 2000 9:35 AM
> To: flexfax@sgi.com
> Subject: flexfax: Trouble receiving Faxes with Elsa Microlink 56k Basic
> Modem
>
>
> Hi,
>
> in near future I'll get trouble - cause I'm sitting every night
> in front of my computer trying to get that following running :-(
>
> - Suse 6.4
> - Hylafax 4.1 beta 2
> - Elsa Microlink 56k basic
>
> I'm running faxaddmodem with defining the modem either as Class
> 1, 2 or 2.0 type.
> But if I receive a fax, the modem connects - exchanges the
> FAX-Device-IDs from and to the sending fax-machine - and nothing
> happens til the sending fax hangs up with an error.
>
> I increased the logging level, I searched through the hylafax
> archive, I've been changing the modem - nothing helped.
> I was searching the Elsa Homepage but didn't find a config.modem file...
>
> Thanks for any hints.
>
> I've tested the following configs:
>
> CLASS 1:
> -----------
> May 24 23:22:38.36: [  462]: SESSION BEGIN 00000024 491111111
> May 24 23:22:47.28: [  462]: ANSWER: FAX CONNECTION
> May 24 23:22:47.28: [  462]: MODEM input buffering enabled
> May 24 23:22:47.28: [  462]: RECV FAX: begin
> May 24 23:22:51.15: [  462]: REMOTE TSI "+491111111"
> May 24 23:22:51.15: [  462]: REMOTE wants 9600 bit/s
> May 24 23:22:51.15: [  462]: REMOTE wants page width 1728 pixels in 215 mm
> May 24 23:22:51.15: [  462]: REMOTE wants unlimited page length
> May 24 23:22:51.15: [  462]: REMOTE wants 3.85 line/mm
> May 24 23:22:51.15: [  462]: REMOTE wants 1-D MR
> May 24 23:22:53.76: [  462]: RECV: begin page
> May 24 23:22:53.76: [  462]: RECV: send trigger 021
>
> **** Process hangs after that - no more entries in log...
>
> *** SNIP **********
>
> ModemType:		Class1		# use this to supply a hint
> ModemRate:		38400		# rate for DCE-DTE communication
> ModemFlowControl:	rtscts		# XON/XOFF flow control assumed
> #  ******** tested with XONXOFF as well.
> GettyArgs:		"-h %l dx_%s"	# modem must auto-detect fax/data
> Class1Cmd:		AT+FCLASS=1	# command to enter class 1
> Class1TCFResponseDelay:	75		# 75ms delay
> between recv TCF & response
> Class1SendPPMDelay:	75		# 75ms delay before sending PPM
> Class1SendTCFDelay:	75		# 75ms delay between
> sending DCS & TCF
> Class1TrainingRecovery:	1500		# 1.5sec delay
> after training failure
> Class1RecvAbortOK:	200		# wait 200ms for abort response
> Class1FrameOverhead:	4		# 4 byte overhead in recvd
> HDLC frames
> Class1RecvIdentTimer:	40000		# 35+5secs waiting for ident frames
> Class1TCFMaxNonZero:	10		# max 10% of data may be non-zero
> Class1TCFMinRun:	1000		# min run is 2/3rds of TCF duration
>
>
>
> *********+ SNIP
>
> Class 2.0
>
> May 24 23:30:11.12: [  562]: SESSION BEGIN 00000025 49111111
> May 24 23:30:11.12: [  562]: <-- [4:ATA\r]
> May 24 23:30:17.22: [  562]: --> [74:+FHT: FF 03 40 20 20 20 48
> 62 6D 47 20 6B 63 75 72 44 20 6B 69 66 61 72 47]
> May 24 23:30:17.22: [  562]: --> [26:+FHT: FF 13 80 00 6E F8 00]
> May 24 23:30:19.87: [  562]: --> [5:+FCON]
> May 24 23:30:21.38: [  562]: --> [74:+FHR: FF 03 43 20 20 20 20
> 20 20 20 20 20 20 20 20 20 20 20 20 20 78 61 46]
> May 24 23:30:21.60: [  562]: --> [23:+FHR: FF 13 83 00 62 70]
> May 24 23:30:25.03: [  562]: --> [5:+FCFR]
> May 24 23:30:25.03: [  562]: --> [28:+FTSI:"Fax                 "]
> May 24 23:30:25.04: [  562]: --> [21:+FDCS:1,5,0,0,0,0,0,0]
> May 24 23:30:25.04: [  562]: --> [2:OK]
> May 24 23:30:25.04: [  562]: <-- [7:AT+FDR\r]
> May 24 23:30:25.19: [  562]: --> [14:+FHT: FF 13 84]
> May 24 23:30:27.08: [  562]: --> [7:CONNECT]
> May 24 23:30:27.08: [  562]: <-- data [1]
>
> *** Nothing happens after that point.
>
>
>
> _______________________________________________________________________
> 1.000.000 DM gewinnen - kostenlos tippen - http://millionenklick.web.de
> IhrName@web.de, 8MB Speicher, Verschluesselung - http://freemail.web.de
>