![]() |
Hello, I checked out hylafax from the cvs server. Now I have a problem with sending faxes. First I tried to send a fax modem. I think it is a modem because of 14400 bit/s. With hylafax-4.1beta1 the log shows: May 08 23:41:46.93: [ 5234]: --> [2:OK] May 08 23:41:46.93: [ 5234]: DIAL 082221039 May 08 23:41:46.93: [ 5234]: <-- [16:ATDT0082221039@\r] May 08 23:42:10.33: [ 5234]: --> [4:+FCO] May 08 23:42:13.17: [ 5234]: --> [128:+FNF: 00 00 09 12 09 4D 30 30 30 30 31 32 33 34 35 36 37 38 49 82 22 10 39 FF FF FF FF FF FF FF 01 0B 02 02 10 01 82 0E 00 00 09] May 08 23:42:13.17: [ 5234]: REMOTE NSF " 00 00 09 12 09 4D 30 30 30 30 31 32 33 34 35 36 37 38 49 8 2 22 10 39 FF FF FF FF FF FF FF 01 0B 02 02 10 01 82 0E 00 00 09" May 08 23:42:13.31: [ 5234]: --> [27:+FCI:" *4982221039"] May 08 23:42:13.31: [ 5234]: REMOTE CSI "*4982221039" May 08 23:42:13.31: [ 5234]: --> [22:+FIS:1,5,0,2,1,1,0,2,0] May 08 23:42:13.31: [ 5234]: --> [2:OK] With the new hylafax-4.1beta2 it shows only: May 17 00:40:49.92: [ 4093]: --> [2:OK] May 17 00:40:49.94: [ 4093]: DIAL 082221039 May 17 00:40:49.94: [ 4093]: <-- [16:ATDT0082221039@\r] May 17 00:41:31.51: [ 4093]: --> [4:+FCO] May 17 00:41:34.38: [ 4093]: --> [128:+FNF: 00 00 09 12 09 4D 30 30 30 30 31 32 33 34 35 36 37 38 49 82 22 10 39 FF FF FF FF FF FF FF 01 0B 02 02 10 01 82 0E 00 00 09] Than the log stops and in /var/log/messages there ist the following entry: May 17 00:40:45 supernase FaxSend[4093]: SEND FAX: JOB 3 DEST 082221039 COMMID 00000003 May 17 00:41:34 supernase FaxQueuer[806]: JOB 3: Send program terminated abnormally with exit status 0xb When I send a fax to a fax machine the log says that ist is a HP fax but it isn't one: May 17 00:45:21.40: [ 4137]: --> [29:+FNF: AD 00 36 40 80 28 01 E4] May 17 00:45:21.40: [ 4137]: REMOTE NSF " AD 00 36 40 80 28 01 E4" May 17 00:45:21.40: [ 4137]: NSF remote fax equipment: HP May 17 00:45:21.40: [ 4137]: --> [27:+FCI:" "] regards Stephan Bauer