flexfax: Sending Error

[Andy Zbikowski <andyzb@ltiflex.com>]

Well, I managed to clear up my last trouble. Apperently the higher ups
want to replace the fax machine with a fax server (easier archiving of
faxes) but still keep the old fax machine for faxes that can't be sent
through the server.

Anyway, reconfiguring the server for incoming/outgoing faxes cleared up
my earlier troubles. Computer vodoo I guess.

So now it recives faxes no problem. It sends them too. But, it can't
seem to successfully send the fax. The log file from the fax server
looks like this:


Apr 27 11:17:40.61: [14504]: SESSION BEGIN 00000006 17634289126
Apr 27 11:17:40.61: [14504]: SEND FAX: JOB 2 DEST 4289126 COMMID
00000006
Apr 27 11:17:44.74: [14504]: STATE CHANGE: RUNNING -> SENDING
Apr 27 11:19:43.14: [14504]: SEND: No response to EOP repeated 3 times;
Giving up after 3 attempts to send same page "docq/doc2.ps;30", dirnum 0
Apr 27 11:19:43.27: [14504]: STATE CHANGE: SENDING -> MODEMWAIT (timeout
5)
Apr 27 11:19:43.27: [14504]: SESSION END


The reciving copy machine recives the fax and prints it out no problem,
but reports COM. E-1 (Line Disconnected during reception)

System:
Debian Linux 2.2
HylaFax 4.0.2 (from debs in distribution)
Modem: USR 56K Faxmodem on ttyS1 (External Sporster 568602 Model 0648)
Using usr-2.0 prototype

I hope someone can give me a clue. Thanks in advance.

-- 
Andy Zbikowski, Sys Admin   | http://www.ltiflex.com
LTI Flexible Products, Inc. | "Reality is merely an illusion, 
21801 Industrial Blvd       |  albeit a very persistent one."
Rogers, MN  55374           |  -- Albert Einstein