flexfax: Re: your mail

[Jacobo Badillo Villeda <jacob@ciateq.mx>]

Well, sincerely I don't remember, that problem was a long time ago. I
think that the cable modem seems to had troubles, so we had to make
another cable.

May be you could try to solve this problem searching on the SGI web site,
about the configuration of the comm. port, and the cable for the modem.

Good look.
 If I remember something else, I'll write you later.


On Wed, 15 Mar 2000, Jinsong Hu wrote:

> I just configure all the Hylafax software on an Irix 5.3 system, all seems
> to be working fine. I downloaded fax-gw.tar from ftp.sgi.com/fax/contrib
> and compiled the fax-gw program, then I use this program to send a fax
> trough the Web.
> 
> did you solve your peoblem ? I have the same problem now except I am now
> using a linux system.
> wonder if you can help me to figure out it too.
> 
> Jinsong
> 
> 
> >>>I ran the faxcron program and then the modem starting to dial out, but
> the
> software couldn't deliver the message, the report of this session says:
> 
>     ---- Transcript of session follows ----
> 
> Feb 21 20:11:26.67: [25954]: SESSION BEGIN 00000002 0166963
> Feb 21 20:11:26.67: [25954]: SEND FAX: JOB 1 DEST 0,166963 COMMID 00000002
> Feb 21 20:12:35.00: [25954]: SEND FAILED: Ringback detected, no answer
> (timeout)
> Feb 21 20:12:35.58: [25954]: SESSION END
> 
> 
> I don't know how to use this stuff to send mails to fax, as you know the
> documentation is about how to configure Hylafax for working as a Server or
> as a Client machine. Please help me to find documentation about how to use
> the software to send faxes via mail or Web pages.
> 
> 
> Thanks in advance
> Your friend Jacobo.
> 
> 
> 
> ----------------------------------------------------------------------------
> ----
> 
> ----------------------------------------------------------------------------
> ----
> 
> 

--------------------------------------------------------
Jacobo   Badillo   Villeda                   CIATEQ A.C.
Redes y Telecomunicaciones         Av. del Retablo # 150
e-mail:    jacob@ciateq.mx     Qro., Qro.  Tel. 16-44-50  
--------------------------------------------------------
[--- signos diacriticos han sido omitidos ---]