HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: login



Hello,
	first you need to find out if you have HylaFax working.  SuSEFax is
simply a frontend/GUI for HylaFax.  Try this as root:
1)	Print a 1 page document to /tmp/trash.ps for example using
whatever word processor and fax it to somewhere.  I'll use phone
number 123-3456 for an example
:  2)	Go to the console and:
	A.	If you use 8.5 x 11 paper, type:
		sendfax -n -D -d 123-3456 /tmp/trash.ps
	B.	If you use A4 paper, type:
		sendfax -d -s a4 -D -d 123-3456 /tmp/trash.ps
3)	If you want to watch the process, then immediately after sending the
fax, type 
tail -f /var/log/messages

Ctrl-C will stop the scrolling of /var/log/messages

	If you were able to send the fax, then your settings in SuSEFax are
probably wrong.

faxstat -s 
will show you which jobs are in the queue and their job #

faxrm {job #}
will kill the job

faxstat -d
will show you the results of your sent/not sent faxes.

Good luck
George
	


 Tue, 08 Feb 2000, χΩ ΞΑΠΙΣΑΜΙ:
> hi everybody,
> i have installed 'HylaFax + SuSEfax' for the second time on my computer,
> but when i click on the bottom 'get status' i received this message:
> 
> 	'SuSEFax.getStatus: SuSEFax.PROTOException: Login incorrect'
> 
> When i configurated the program i don' t make any password :-(
> 
> Where is the problem?
> 
> Regards
> 
> Massimo
--
My personal website
http://www.firstnethou.com/gz/welcome.htm




Project hosted by iFAX Solutions