flexfax: Unspecified Phrase error (code 20)

[Glen Batchelor <webmaster@allspec.com>]

Can anyone tell me why the remote is killing the transmission?
Also, after every fax, the modem hangs. I have to rerun "faxmodem cua1"
to wake it back up.
Any suggestions?

         Thanks,

              Ryengoth

Feb 08 23:35:06.77: [25104]: <-- [15:ATE0V1Q0S0=0H0\r]
Feb 08 23:35:06.91: [25104]: --> [2:OK]
Feb 08 23:35:06.91: [25104]: <-- [21:ATS8=2S7=30&K3&D2&C1\r]
Feb 08 23:35:07.06: [25104]: --> [2:OK]
Feb 08 23:35:07.06: [25104]: <-- [14:AT+FCLASS=2.0\r]
Feb 08 23:35:07.20: [25104]: --> [2:OK]
Feb 08 23:35:07.20: [25104]: <-- [9:AT+FLO=2\r]
Feb 08 23:35:07.34: [25104]: --> [2:OK]
Feb 08 23:35:07.34: [25104]: <-- [9:AT+FPP=0\r]
Feb 08 23:35:07.48: [25104]: --> [2:OK]
Feb 08 23:35:07.48: [25104]: <-- [9:AT+FBO=0\r]
Feb 08 23:35:07.62: [25104]: --> [2:OK]
Feb 08 23:35:07.62: [25104]: <-- [10:AT+FCT=30\r]
Feb 08 23:35:07.76: [25104]: --> [2:OK]
Feb 08 23:35:07.76: [25104]: <-- [15:AT+FNR=1,1,1,1\r]
Feb 08 23:35:07.90: [25104]: --> [2:OK]
Feb 08 23:35:07.90: [25104]: <-- [9:AT+FIE=0\r]
Feb 08 23:35:08.04: [25104]: --> [2:OK]
Feb 08 23:35:08.04: [25104]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Feb 08 23:35:08.19: [25104]: --> [2:OK]
Feb 08 23:35:08.19: [25104]: <-- [5:ATM0\r]
Feb 08 23:35:08.33: [25104]: --> [2:OK]
Feb 08 23:35:08.33: [25104]: <-- [14:AT+FCLASS=2.0\r]
Feb 08 23:35:08.57: [25104]: --> [2:OK]
Feb 08 23:35:08.57: [25104]: <-- [9:AT+FLO=2\r]
Feb 08 23:35:08.81: [25104]: --> [2:OK]
Feb 08 23:35:08.81: [25104]: <-- [9:AT+FPP=0\r]
Feb 08 23:35:09.05: [25104]: --> [2:OK]
Feb 08 23:35:09.05: [25104]: <-- [9:AT+FBO=0\r]
Feb 08 23:35:09.29: [25104]: --> [2:OK]
Feb 08 23:35:09.29: [25104]: <-- [10:AT+FCT=30\r]
Feb 08 23:35:09.53: [25104]: --> [2:OK]
Feb 08 23:35:09.53: [25104]: <-- [15:AT+FNR=1,1,1,1\r]
Feb 08 23:35:09.77: [25104]: --> [2:OK]
Feb 08 23:35:09.77: [25104]: <-- [9:AT+FIE=0\r]
Feb 08 23:35:10.01: [25104]: --> [2:OK]
Feb 08 23:35:10.01: [25104]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Feb 08 23:35:10.26: [25104]: --> [2:OK]
Feb 08 23:35:10.26: [25104]: <-- [22:AT+FLI="NothingSetup"\r]
Feb 08 23:35:10.51: [25104]: --> [2:OK]
[chop alot of stuff]
Feb 08 23:35:41.19: [25104]: --> [2:OK]
Feb 08 23:35:41.19: [25104]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Feb 08 23:35:41.19: [25104]: SEND FAILED: Unspecified Transmit Phase B
error
Feb 08 23:35:41.19: [25104]: <-- [5:ATH0\r]
Feb 08 23:35:41.19: [25104]: --> [10:NO CARRIER]
Feb 08 23:35:41.19: [25104]: MODEM No carrier
Feb 08 23:35:41.22: [25104]: SESSION END