HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: faxaddmodem problem on Solaris 2.6







I have solved my problem!

The port monitor ttymon was running for /dev/cua/b port. I disabled the port,
and was able to
run faxaddmodem.
This is already documented in Solaris Guidance section in Server Setup and Basic
Configuration
Information posted on Hylafax website. Only I failed to notice this section
before.

Sudhir





Sudhir_Koka@tivoli.com on 12/07/99 05:52:53 PM

To:   flexfax@sgi.com
cc:    (bcc: Sudhir Koka/Tivoli Systems)
Subject:  flexfax: faxaddmodem problem on Solaris 2.6




The faxaddmodem script fails during the hylafax installation with the
following error:

Probing for best speed to talk to modem:
 38400/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
 19200/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
 9600/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
 4800/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
 2400/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open
 1200/opt/local/fax/lib/faxaddmodem[808]: /tmp/addmodem6212: cannot open

Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly.  If
all else fails, try the -s option to lock the speed.

I am using hylafax-v4.0p12 version under Solaris 2.6 platform with gcc 2.7.2 and
US Robotics V. Everything modem. I have configured /dev/cua/b serial
port . I am able to get the cu and tip commands working with /dev/cua/b device.
cu -l /dev/cua/b <phone no.> works fine. I am able to dial out.

I have run the faxsetup script. It has started hfaxd and faxq processes. But it
fails
in the faxaddmodem script with the above mentioned error. I tried to debug the
faxaddmodem script, and it seems like /dev/cua/b device is busy, and in
SendToModem function ondelay doesn;t create the temporary file
 /tmp/addmodem6212. Any idea why /dev/cua/b device is busy?

The non-default server configuration parameters are:

CountryCode:            1
AreaCode:               408
FAXNumber:              +14085011993
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        "etc/dialrules"
SessionTracing:         11
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:
ClocalAsRoot:           yes
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           25
















Project hosted by iFAX Solutions