HylaFAX The world's most advanced open source fax server |
> Not so for the Total Control. The problem we are seeing is that the faxes > are sent, but after the faxes are sent, we get an error. Always the same > error, and always 3 minutes after the "SEND send EOP" and "<-- data [2]." It always will be 3 minutes, unless you change the timeout; basically the modem failed to enter phase D, probably because it failed to see the end code on the transmission, or the remote modem failed to respond to the phase D message. Can you confirm that there was no overrun, as there isn't enough of the log to verify your flow control.