HylaFAX The world's most advanced open source fax server |
Can't send more than one page to any receiver ... Error reported about MPS or EOP Please help me Modem: Compaq 56000 (?) fac class 1 Hylafax Version: Trying localhost (127.0.0.1) at port 4559... Connected to localhost. 220 prn server (HylaFAX (tm) Version 4.0pl2) ready. -> USER michele 230 User michele logged in. -> PORT 127,0,0,1,4,5 200 PORT command successful. -> LIST status 150 Opening new data connection for "status". HylaFAX scheduler on prn: Running Modem modem (+39957382397): Running and idle 226 Transfer complete. OS: Linux RedHat 5.x (Linux version 2.0.36) Log: Oct 29 09:06:21.80: [ 564]: --> [0:] Oct 29 09:06:21.80: [ 564]: MODEM <Empty line> Oct 29 09:06:21.80: [ 564]: <-- data [1] Oct 29 09:06:21.86: [ 564]: --> [2:OK] Oct 29 09:06:21.86: [ 564]: SEND send MPS (more pages, same document) Oct 29 09:06:21.86: [ 564]: <-- [9:AT+FTH=3\r] Oct 29 09:06:21.92: [ 564]: --> [7:CONNECT] data Oct 29 09:06:23.23: [ 564]: --> [2:OK] Oct 29 09:06:23.23: [ 564]: <-- [9:AT+FRH=3\r] Oct 29 09:06:26.33: [ 564]: --> [0:] Oct 29 09:06:26.33: [ 564]: MODEM <Empty line> Oct 29 09:06:26.33: [ 564]: <-- data [1] Oct 29 09:06:26.39: [ 564]: --> [2:OK] Oct 29 09:06:26.39: [ 564]: <-- [9:AT+FTH=3\r] Oct 29 09:06:26.44: [ 564]: --> [7:CONNECT] data Oct 29 09:06:27.76: [ 564]: --> [2:OK] Oct 29 09:06:27.76: [ 564]: <-- [5:ATH0\r] Oct 29 09:06:28.48: [ 564]: --> [2:OK] Oct 29 09:06:28.48: [ 564]: SESSION END Another example of log: Oct 29 08:56:32.46: [ 353]: <-- [12:ATS8=2S7=60\r] Oct 29 08:56:32.48: [ 353]: --> [2:OK] Oct 29 08:56:32.48: [ 353]: <-- [12:AT+FCLASS=1\r] Oct 29 08:56:32.50: [ 353]: --> [2:OK] Oct 29 08:56:32.50: [ 353]: <-- [5:ATM0\r] Oct 29 08:56:32.51: [ 353]: --> [2:OK] Oct 29 08:56:32.51: [ 353]: <-- [12:AT+FCLASS=1\r] Oct 29 08:56:32.63: [ 353]: --> [2:OK] Oct 29 08:56:32.66: [ 353]: DIAL 0,095338280 Oct 29 08:56:32.66: [ 353]: <-- [16:ATDT0,095338280\r] Oct 29 08:56:53.10: [ 353]: --> [7:CONNECT] Oct 29 08:56:54.48: [ 353]: --> [2:OK] Oct 29 08:56:54.48: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:56:54.50: [ 353]: --> [7:CONNECT] Oct 29 08:56:55.20: [ 353]: --> [2:OK] Oct 29 08:56:55.20: [ 353]: REMOTE CSI "095338280" Oct 29 08:56:55.20: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:56:55.22: [ 353]: --> [7:CONNECT] Oct 29 08:56:55.49: [ 353]: --> [2:OK] Oct 29 08:56:55.49: [ 353]: REMOTE best rate 9600 bit/s Oct 29 08:56:55.49: [ 353]: REMOTE max page width 1728 pixels in 215 mm Oct 29 08:56:55.49: [ 353]: REMOTE max unlimited page length Oct 29 08:56:55.49: [ 353]: REMOTE best vres 7.7 line/mm Oct 29 08:56:55.49: [ 353]: REMOTE best format 2-D MMR Oct 29 08:56:55.49: [ 353]: REMOTE supports T.30 Annex A, ECM Oct 29 08:56:55.49: [ 353]: REMOTE best 20 ms/scanline Oct 29 08:56:55.49: [ 353]: USE 9600 bit/s Oct 29 08:56:55.49: [ 353]: USE 20 ms/scanline Oct 29 08:56:55.49: [ 353]: SEND file "docq/doc156.ps;00" Oct 29 08:56:55.63: [ 353]: USE page width 1728 pixels in 215 mm Oct 29 08:56:55.63: [ 353]: USE unlimited page length Oct 29 08:56:55.63: [ 353]: USE 3.85 line/mm Oct 29 08:56:55.63: [ 353]: USE 1-D MR Oct 29 08:56:55.63: [ 353]: SEND training at v.29 9600 bit/s Oct 29 08:56:55.63: [ 353]: <-- [9:AT+FTH=3\r] Oct 29 08:56:55.68: [ 353]: --> [7:CONNECT] Oct 29 08:56:55.68: [ 353]: <-- data [23] Oct 29 08:56:55.68: [ 353]: <-- data [2] Oct 29 08:56:57.47: [ 353]: --> [7:CONNECT] Oct 29 08:56:57.47: [ 353]: <-- data [6] Oct 29 08:56:57.47: [ 353]: <-- data [2] Oct 29 08:56:57.90: [ 353]: --> [2:OK] Oct 29 08:56:57.90: [ 353]: DELAY 75 ms Oct 29 08:56:57.99: [ 353]: <-- [10:AT+FTM=96\r] Oct 29 08:56:58.05: [ 353]: --> [7:CONNECT] Oct 29 08:56:58.05: [ 353]: <-- data [1024] Oct 29 08:56:58.05: [ 353]: <-- data [776] Oct 29 08:56:58.05: [ 353]: <-- data [2] Oct 29 08:57:00.01: [ 353]: --> [2:OK] Oct 29 08:57:00.01: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:57:00.40: [ 353]: --> [7:CONNECT] Oct 29 08:57:01.26: [ 353]: --> [2:OK] Oct 29 08:57:01.26: [ 353]: TRAINING succeeded Oct 29 08:57:01.26: [ 353]: <-- [10:AT+FTM=96\r] Oct 29 08:57:01.32: [ 353]: --> [7:CONNECT] Oct 29 08:57:01.32: [ 353]: SEND begin page data Oct 29 08:57:17.37: [ 353]: SENT 6171 bytes of data Oct 29 08:57:17.37: [ 353]: SEND 1D RTC Oct 29 08:57:17.37: [ 353]: <-- data [29] Oct 29 08:57:17.38: [ 353]: <-- data [2] Oct 29 08:57:17.38: [ 353]: SEND end page Oct 29 08:57:29.19: [ 353]: --> [2:^S^Q] Oct 29 08:57:29.19: [ 353]: --> [2:OK] Oct 29 08:57:29.19: [ 353]: DELAY 75 ms Oct 29 08:57:29.28: [ 353]: SEND send MPS (more pages, same document) Oct 29 08:57:29.28: [ 353]: <-- [9:AT+FTH=3\r] Oct 29 08:57:29.33: [ 353]: --> [7:CONNECT] Oct 29 08:57:29.33: [ 353]: <-- data [3] Oct 29 08:57:29.33: [ 353]: <-- data [2] Oct 29 08:57:30.65: [ 353]: --> [2:OK] Oct 29 08:57:30.65: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:57:33.75: [ 353]: --> [0:] Oct 29 08:57:33.75: [ 353]: MODEM <Empty line> Oct 29 08:57:33.75: [ 353]: <-- data [1] Oct 29 08:57:33.81: [ 353]: --> [2:OK] Oct 29 08:57:33.81: [ 353]: SEND send MPS (more pages, same document) Oct 29 08:57:33.81: [ 353]: <-- [9:AT+FTH=3\r] Oct 29 08:57:33.86: [ 353]: --> [7:CONNECT] Oct 29 08:57:33.86: [ 353]: <-- data [3] Oct 29 08:57:33.86: [ 353]: <-- data [2] Oct 29 08:57:35.17: [ 353]: --> [2:OK] Oct 29 08:57:35.17: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:57:38.27: [ 353]: --> [0:] Oct 29 08:57:38.27: [ 353]: MODEM <Empty line> Oct 29 08:57:38.27: [ 353]: <-- data [1] Oct 29 08:57:38.33: [ 353]: --> [2:OK] Oct 29 08:57:38.33: [ 353]: SEND send MPS (more pages, same document) Oct 29 08:57:38.33: [ 353]: <-- [9:AT+FTH=3\r] Oct 29 08:57:38.39: [ 353]: --> [7:CONNECT] Oct 29 08:57:38.39: [ 353]: <-- data [3] Oct 29 08:57:38.39: [ 353]: <-- data [2] Oct 29 08:57:39.70: [ 353]: --> [2:OK] Oct 29 08:57:39.70: [ 353]: <-- [9:AT+FRH=3\r] Oct 29 08:57:42.80: [ 353]: --> [0:] Oct 29 08:57:42.80: [ 353]: MODEM <Empty line> Oct 29 08:57:42.80: [ 353]: <-- data [1] Oct 29 08:57:42.86: [ 353]: --> [2:OK] Oct 29 08:57:42.86: [ 353]: SEND: No response to MPS or EOP repeated 3 tries; Giving up after 3 attempts to send same page "docq/doc156.ps;00", dirnum 0 Oct 29 08:57:42.86: [ 353]: <-- [9:AT+FTH=3\r] Oct 29 08:57:42.91: [ 353]: --> [7:CONNECT] Oct 29 08:57:42.91: [ 353]: <-- data [3] Oct 29 08:57:42.91: [ 353]: <-- data [2] Oct 29 08:57:44.23: [ 353]: --> [2:OK] Oct 29 08:57:44.23: [ 353]: <-- [5:ATH0\r] Oct 29 08:57:44.95: [ 353]: --> [2:OK] Oct 29 08:57:44.95: [ 353]: SESSION END
begin:vcard n:Malgeri;Michele tel;fax:+39 095388280 tel;work:+39 0957382360 x-mozilla-html:TRUE org:Facolta' di Ingegneria - Universita' di Catania;Istituto di Informatica e Telecomunicazioni version:2.1 email;internet:Michele.Malgeri@iit.unict.it title:Researcher adr;quoted-printable:;;Edificio Polifunzionale=0D=0AViale Andrea Doria, 6;Catania;;I-95125;Italy x-mozilla-cpt:;-16800 fn:Michele Malgeri end:vcard