HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Unable to configure modem for fax use



I'm using hylafax-v4.0pl2 with a MultiTech MT1932ZDX modem.
It works quite nicely for sending FAXes, but occasionally it fails
with this result...

Oct 05 12:26:57.81: [23469]: <-- [12:AT+FCLASS=2\r]
Oct 05 12:26:58.13: [23469]: --> [2:OK]
Oct 05 12:26:58.13: [23469]: <-- [10:AT+FTBC=0\r]
Oct 05 12:26:58.45: [23469]: --> [2:OK]
Oct 05 12:26:58.45: [23469]: <-- [10:AT+FBOR=0\r]
Oct 05 12:26:58.76: [23469]: --> [2:OK]
Oct 05 12:26:58.76: [23469]: <-- [13:AT+FPHCTO=30\r]
Oct 05 12:26:59.07: [23469]: --> [2:OK]
Oct 05 12:26:59.07: [23469]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Oct 05 12:26:59.40: [23469]: --> [2:OK]
Oct 05 12:26:59.40: [23469]: <-- [23:AT+FLID="+12045551212"\r]
Oct 05 12:27:29.41: [23469]: MODEM <Timeout>
Oct 05 12:27:29.41: [23469]: SEND FAILED: Unable to configure modem for fax use
Oct 05 12:27:29.41: [23469]: SESSION END

This happens once or twice, and after that it works normally again.
It's a send-only configuration, so nothing else should be messing
with the modem.  Any suggestions?


-- 
-Gary Mills-    -Unix Support-    -U of M Academic Computing and Networking-




Project hosted by iFAX Solutions