HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
EOP problem
Hi Federico,
I wrote u. message. I have the same problem. I think the problem is not
within resolution. I think it is software problem. I found many
fax-mashines tath are not working normal. I have by me one modem tath is
not working normal.
So.
Have u. find any solution or not?
Ivan.
I looked at:
Try sending in normal resolution (98 dpi). Worked fine for me,
yesterday.
On Tue, 28 Sep 1999, Federico Sevilla III wrote:
> Hi there everyone!
>
> I recently set up HylaFAX 4.1beta1 on RedHat 6.0 using the RPMs. After
all
> the reading, and finally getting my modem (A USRobotics Sportster
v.90) to
> handshake properly with a Panasonic KX-F700 fax machine, I have one
last
> problem left. HylaFAX keeps on resending the fax (test fax, a single
one).
> The output is okay naman, but I guess for the computer it's not
enough.
>
> I checked the logs and found the following pertinent information:
>
> Sep 28 16:36:58.35: [ 7625]: <-- data [9]
> Sep 28 16:36:58.35: [ 7625]: SEND end page
> Sep 28 16:36:58.35: [ 7625]: SEND send EOP (no more pages or
documents)
> Sep 28 16:36:58.35: [ 7625]: <-- data [2]
> Sep 28 16:37:22.03: [ 7625]: --> [7:+FHS:54]
> Sep 28 16:37:22.03: [ 7625]: REMOTE HANGUP: No response to EOP
repeated 3
> times (code 54)
>
> Hmmmmm ...
>
> I've got my maximum bad lines, and minimum percent good set to the
> defaults implicitly (5 and 95 respectively). I'm using most of the
configs
> from the usr-2.0 example file in config/. This is a Class 2.0 modem
and
> it's got AT+FCLASS=2.0 set as its Class2Cmd.
>
> Would there be any way to fix this? Any ideas? Muchos gracias and
please
> pardon the potential lameness. :-)
>
> [ Jijo Sevilla ]
> [ jijo@leather-collection.com ]
> [ eFax # : +1 (707) 988-0887 ]
>
begin: vcard
fn: Ivan Stoyanov
n: ;Ivan Stoyanov
email;internet: stoyanov@unisoftbg.com
note: TEST MESSAGE
x-mozilla-cpt: ;0
x-mozilla-html: TRUE
version: 2.1
end: vcard