HylaFAX The world's most advanced open source fax server |
Hello all, i got this kind of error since 2 days, and i can not understand why !!! i do not changed nothing in my configuration. whasup ???? this is my error log file i desperatly need help !!! TIA, *-------------------------------------------------------------*--------* | Luca Domenella Email: luca@satori.it | even | | Responsabile RETI (Network Manager) Office: +39 735 782409 | little | | Satori Network Solutions Fax: +39 735 786360 | get | | http: // www.satori.it Mobile: +39 348 3516239 | Mads | *-------------------------------------------------------------*--------* ----- Original Message ----- From: Facsimile Agent <fax@server.satori.it> To: <luca@satori.it> Sent: Wednesday, September 22, 1999 10:15 AM Subject: facsimile job 60 to 0734683224 requeued > Your facsimile job to 0734683224 was not sent because: > No response to MPS or EOP repeated 3 tries > > The job will be retried at 10:20. > > ---- Transcript of session follows ---- > > Sep 22 10:13:33.00: [ 991]: SESSION BEGIN 00000145 397350734683224 > Sep 22 10:13:33.00: [ 991]: SEND FAX: JOB 60 DEST 0734683224 COMMID 00000145 > Sep 22 10:13:33.00: [ 991]: DELAY 2600 ms > Sep 22 10:13:35.60: [ 991]: <-- [15:ATE0V1Q0S0=0H0\r] > Sep 22 10:13:35.62: [ 991]: --> [2:OK] > Sep 22 10:13:35.62: [ 991]: <-- [12:ATS8=2S7=60\r] > Sep 22 10:13:35.64: [ 991]: --> [2:OK] > Sep 22 10:13:35.64: [ 991]: <-- [12:AT+FCLASS=1\r] > Sep 22 10:13:35.66: [ 991]: --> [2:OK] > Sep 22 10:13:35.66: [ 991]: <-- [5:ATM0\r] > Sep 22 10:13:35.67: [ 991]: --> [2:OK] > Sep 22 10:13:35.67: [ 991]: <-- [12:AT+FCLASS=1\r] > Sep 22 10:13:35.79: [ 991]: --> [2:OK] > Sep 22 10:13:35.79: [ 991]: DIAL 0734683224 > Sep 22 10:13:35.79: [ 991]: <-- [17:ATX3DT0734683224\r] > Sep 22 10:13:56.19: [ 991]: --> [7:CONNECT] > Sep 22 10:13:57.44: [ 991]: --> [2:OK] > Sep 22 10:13:57.44: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:13:57.46: [ 991]: --> [7:CONNECT] > Sep 22 10:13:58.16: [ 991]: --> [2:OK] > Sep 22 10:13:58.16: [ 991]: REMOTE CSI "0734 683224" > Sep 22 10:13:58.16: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:13:58.18: [ 991]: --> [7:CONNECT] > Sep 22 10:13:58.42: [ 991]: --> [2:OK] > Sep 22 10:13:58.42: [ 991]: REMOTE best rate 9600 bit/s > Sep 22 10:13:58.42: [ 991]: REMOTE max page width 1728 pixels in 215 mm > Sep 22 10:13:58.42: [ 991]: REMOTE max unlimited page length > Sep 22 10:13:58.42: [ 991]: REMOTE best vres 7.7 line/mm > Sep 22 10:13:58.42: [ 991]: REMOTE best format 2-D MR > Sep 22 10:13:58.42: [ 991]: REMOTE supports T.30 Annex A, ECM > Sep 22 10:13:58.42: [ 991]: REMOTE best 20 ms, 10 ms/scanline > Sep 22 10:13:58.42: [ 991]: USE 9600 bit/s > Sep 22 10:13:58.42: [ 991]: USE 20 ms, 10 ms/scanline > Sep 22 10:13:58.42: [ 991]: SEND file "docq/doc77.ps;41" > Sep 22 10:13:58.42: [ 991]: USE page width 1728 pixels in 215 mm > Sep 22 10:13:58.42: [ 991]: USE unlimited page length > Sep 22 10:13:58.42: [ 991]: USE 7.7 line/mm > Sep 22 10:13:58.42: [ 991]: USE 2-D MR > Sep 22 10:13:58.42: [ 991]: SEND training at v.29 9600 bit/s > Sep 22 10:13:58.42: [ 991]: <-- [9:AT+FTH=3\r] > Sep 22 10:13:58.47: [ 991]: --> [7:CONNECT] > Sep 22 10:14:00.26: [ 991]: --> [7:CONNECT] > Sep 22 10:14:00.69: [ 991]: --> [2:OK] > Sep 22 10:14:00.69: [ 991]: DELAY 75 ms > Sep 22 10:14:00.77: [ 991]: <-- [10:AT+FTM=96\r] > Sep 22 10:14:00.83: [ 991]: --> [7:CONNECT] > Sep 22 10:14:02.78: [ 991]: --> [2:OK] > Sep 22 10:14:02.78: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:14:03.68: [ 991]: --> [7:CONNECT] > Sep 22 10:14:04.59: [ 991]: --> [2:OK] > Sep 22 10:14:04.59: [ 991]: TRAINING succeeded > Sep 22 10:14:04.59: [ 991]: <-- [10:AT+FTM=96\r] > Sep 22 10:14:04.65: [ 991]: --> [7:CONNECT] > Sep 22 10:14:04.65: [ 991]: SEND begin page > Sep 22 10:14:18.63: [ 991]: SENT 27499 bytes of data > Sep 22 10:14:32.61: [ 991]: SENT 27388 bytes of data > Sep 22 10:14:46.58: [ 991]: SENT 27361 bytes of data > Sep 22 10:15:00.56: [ 991]: SENT 27409 bytes of data > Sep 22 10:15:14.53: [ 991]: SENT 23593 bytes of data > Sep 22 10:15:14.53: [ 991]: SEND 2D RTC > Sep 22 10:15:14.53: [ 991]: SEND end page > Sep 22 10:15:25.06: [ 991]: --> [2:] > Sep 22 10:15:25.06: [ 991]: --> [2:OK] > Sep 22 10:15:25.06: [ 991]: DELAY 95 ms > Sep 22 10:15:25.16: [ 991]: SEND send EOP (no more pages or documents) > Sep 22 10:15:25.16: [ 991]: <-- [9:AT+FTH=3\r] > Sep 22 10:15:25.21: [ 991]: --> [7:CONNECT] > Sep 22 10:15:26.53: [ 991]: --> [2:OK] > Sep 22 10:15:26.53: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:15:29.63: [ 991]: --> [0:] > Sep 22 10:15:29.63: [ 991]: MODEM <Empty line> > Sep 22 10:15:29.68: [ 991]: --> [2:OK] > Sep 22 10:15:29.68: [ 991]: SEND send EOP (no more pages or documents) > Sep 22 10:15:29.68: [ 991]: <-- [9:AT+FTH=3\r] > Sep 22 10:15:29.73: [ 991]: --> [7:CONNECT] > Sep 22 10:15:31.05: [ 991]: --> [2:OK] > Sep 22 10:15:31.05: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:15:34.15: [ 991]: --> [0:] > Sep 22 10:15:34.15: [ 991]: MODEM <Empty line> > Sep 22 10:15:34.20: [ 991]: --> [2:OK] > Sep 22 10:15:34.20: [ 991]: SEND send EOP (no more pages or documents) > Sep 22 10:15:34.20: [ 991]: <-- [9:AT+FTH=3\r] > Sep 22 10:15:34.25: [ 991]: --> [7:CONNECT] > Sep 22 10:15:35.57: [ 991]: --> [2:OK] > Sep 22 10:15:35.57: [ 991]: <-- [9:AT+FRH=3\r] > Sep 22 10:15:38.67: [ 991]: --> [0:] > Sep 22 10:15:38.67: [ 991]: MODEM <Empty line> > Sep 22 10:15:38.72: [ 991]: --> [2:OK] > Sep 22 10:15:38.72: [ 991]: <-- [9:AT+FTH=3\r] > Sep 22 10:15:38.77: [ 991]: --> [7:CONNECT] > Sep 22 10:15:40.08: [ 991]: --> [2:OK] > Sep 22 10:15:40.08: [ 991]: <-- [5:ATH0\r] > Sep 22 10:15:42.01: [ 991]: --> [2:OK] > Sep 22 10:15:42.01: [ 991]: SESSION END