HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

faxgetty goes out to lunch




Hi,

Sorry, but I am the end of my rope... I read the set up docs.
I read the troubleshooting docs.  I turned on my session and
server tracing and I still come up empty.

config:
HylaFAX v4.1beta (also 4.0pl2) / Solaris 2.6 / gcc 2.8.1
modem MultiTech MT2834BA firmware 0207.

probemodem talks to the modem very happily on cua/b

And with...
ServerTracing:          0x211
SessionTracing:         0x4F

...logging gives me:
Aug  6 16:58:09 photo FaxQueuer[19362]: HylaFAX (tm) Version 4.1beta1
Aug  6 16:58:09 photo FaxQueuer[19362]: Copyright (c) 1990-1996 Sam Leffler
Aug  6 16:58:09 photo FaxQueuer[19362]: Copyright (c) 1991-1996 Silicon 
Graphics, Inc.
Aug  6 17:23:31 photo FaxGetty[21167]: OPEN /dev/cua/b

And that's it... gone forever.  No session log ever shows up in the log
directory.

truss says:
open("/dev/cua/b", O_RDWR|O_NDELAY|O_NOCTTY)    = 9
fcntl(9, F_GETFL, 0x00000000)                   = 6
fstat64(9, 0xEFFFEE10)                          = 0
fstat64(9, 0xEFFFEE10)                          = 0
fcntl(9, F_SETFL, 0x00000002)                   = 0
fstat(9, 0xEFFFEF78)                            = 0
fchown(9, 5, 5)                                 = 0
fchmod(9, 0600)                                 = 0
seteuid(5)                                      = 0
ioctl(9, TCGETS, 0xEFFFEFD8)                    = 0
ioctl(9, TCGETX, 0xEFFFEFC8)                    Err#22 EINVAL
ioctl(9, TCSETS, 0xEFFFEFD8)                    = 0
ioctl(9, TCFLSH, 0)                             = 0
write(9, " A T E 0 V 1 Q 0 S 0 = 0".., 14)      = 14
write(9, "\r", 1)                               = 1
sigaction(SIGALRM, 0xEFFFECC0, 0x00000000)      = 0
setitimer(ITIMER_REAL, 0xEFFFED40, 0x00000000)  = 0
read(9, 0x000A94EC, 1024)       (sleeping...)
    Received signal #14, SIGALRM, in read() [caught]
read(9, 0x000A94EC, 1024)                       Err#4 EINTR
setcontext(0xEFFFEAA8)
setitimer(ITIMER_REAL, 0x0009869C, 0x00000000)  = 0
ioctl(9, TIOCMBIC, 0xEFFFEFFC)                  = 0
poll(0xEFFFD008, 0, 2600)       (sleeping...)
poll(0xEFFFD008, 0, 2600)                       = 0
ioctl(9, TIOCMBIS, 0xEFFFEFFC)                  = 0
close(9)                        (sleeping...)


faxstat just says: Initializing server
Outgoing jobs just sit there. Incoming calls get answered, but nothing
further.
And no logs...

Any known idiocies in Solaris that account for this?  Any
obvious idiocies on my part?

Thanks much,
--rrb.
---------------------------------------------------------------------.v.---
Richard R. Buonanno				'Content, not format'
System Manager		Myxa Corporation
phone: (215) 914-2629	fax: (215) 938-0235
email: rrb@myxa.com	http://www.myxa.com/




Project hosted by iFAX Solutions