flexfax: USR 36.6 Voice Modem Hangs Up after Handschake

[Bernd E�mann <psycho@uni-paderborn.de>]

Hello,

I've got a problem with sending facsimiles via HylaFAX. Everything seemes to
work fine. After sending the fax I receive the message that the fax was send
correctly, but in fact the receiving fax machine isn't printing out
anything. By the way: receiving facsimiles from this machine works with
HylaFAX.
Has anybody any suggestions?

Sorry, that I can't give you further information since I'm a real modem
newbie. Here is what I know:

Some facts:
I'm running haylafax v4.0pl2 under SuSe 5.3, the modem is a USR Sportster
Voice 36.6 it is assembled behind an ISDN-installation (Quante Maxima IS).

The faxprotocol:
Jul 29 18:13:43.53: [  393]: SESSION BEGIN 00000026 *********
Jul 29 18:13:43.53: [  393]: SEND FAX: JOB 12 DEST ******* COMMID 00000026
Jul 29 18:13:43.53: [  393]: DELAY 2600 ms
Jul 29 18:13:46.13: [  393]: <-- [15:ATE0V1Q0S0=0H0\r]
Jul 29 18:13:46.28: [  393]: --> [2:OK]
Jul 29 18:13:46.28: [  393]: <-- [12:ATS8=2S7=60\r]
Jul 29 18:13:46.42: [  393]: --> [2:OK]
Jul 29 18:13:46.42: [  393]: <-- [12:AT+FCLASS=1\r]
Jul 29 18:13:46.56: [  393]: --> [2:OK]
Jul 29 18:13:46.56: [  393]: <-- [7:ATL2M1\r]
Jul 29 18:13:46.70: [  393]: --> [2:OK]
Jul 29 18:13:46.70: [  393]: <-- [12:AT+FCLASS=1\r]
Jul 29 18:13:46.95: [  393]: --> [2:OK]
Jul 29 18:13:46.96: [  393]: DIAL ********
Jul 29 18:13:46.96: [  393]: <-- [16:ATDT***********\r]
Jul 29 18:14:03.01: [  393]: --> [7:CONNECT]
Jul 29 18:14:04.25: [  393]: --> [2:OK]
Jul 29 18:14:04.25: [  393]: <-- [9:AT+FRH=3\r]
Jul 29 18:14:04.27: [  393]: --> [7:CONNECT]
Jul 29 18:14:04.94: [  393]: --> [2:OK]
Jul 29 18:14:04.94: [  393]: REMOTE CSI "+**********"
Jul 29 18:14:04.94: [  393]: <-- [9:AT+FRH=3\r]
Jul 29 18:14:04.96: [  393]: --> [7:CONNECT]
Jul 29 18:14:05.29: [  393]: --> [2:OK]
Jul 29 18:14:05.29: [  393]: REMOTE best rate 9600 bit/s
Jul 29 18:14:05.29: [  393]: REMOTE max page width 1728 pixels in 215 mm
Jul 29 18:14:05.29: [  393]: REMOTE max unlimited page length
Jul 29 18:14:05.29: [  393]: REMOTE best vres 7.7 line/mm
Jul 29 18:14:05.29: [  393]: REMOTE best format 1-D MR
Jul 29 18:14:05.29: [  393]: REMOTE supports T.30 Annex A, ECM
Jul 29 18:14:05.29: [  393]: REMOTE best 0 ms/scanline
Jul 29 18:14:05.29: [  393]: USE 9600 bit/s
Jul 29 18:14:05.29: [  393]: USE 0 ms/scanline
Jul 29 18:14:05.29: [  393]: <-- [9:AT+FTH=3\r]
Jul 29 18:14:05.50: [  393]: --> [7:CONNECT]
Jul 29 18:14:05.50: [  393]: <-- data [3]
Jul 29 18:14:05.50: [  393]: <-- data [2]
Jul 29 18:14:06.67: [  393]: --> [2:OK]
Jul 29 18:14:06.67: [  393]: <-- [5:ATH0\r]
Jul 29 18:14:06.91: [  393]: --> [2:OK]
Jul 29 18:14:06.91: [  393]: SESSION END
c00000026 line 1/41 (END)


Modem Data:
Product type           Germany External
Options                V32bis,V.FC,V.34+
Fax Options            Class 1/Class 2.0
Clock Freq             92.0Mhz
Eprom                  256k
Ram                    64k
EPROM date             8/21/96
DSP date               8/21/96
EPROM rev              2.0
DSP rev                2.0