Re: flexfax: modem not seen ...

[Andrew CROKE <apcroke@winger.awamarine.com.au>]

Hi Gianluca,

I gather you have confirmed the /dev/ttysX with minicom?

Try running /usr/local/sbin/probemodem ttys?

If probemodem can not find the modem, faxgetty will not find it.

Attached is my output from this. If it can't talk to the device it will
run through a list of speeds it is trying and bang out.

This is for a GVC modem with a Rockwell chipset. The config I am using
is one that comes with the distribution and seems to be working well.

Good luck.

-- 
Andrew Croke         Fax: +61 (0)3 9386 2596
P.O Box  451         Mob: +61 (0)411 511 160
North Melbourne 3051
a.croke@ugrad.unimelb.edu.au  (academic)
andrew.croke@awamarine.com.au (commercial)


Gianluca Granero wrote:

> > > >
> > > >   Have you run "faxmodem" or set up "faxgetty" in your /etc/inittab ?
> > > tried both ways
> > > faxmodem gives no answer ..



/usr/local/sbin/probemodem cua1


Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to insure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1+2 modem.

ATI0    RESULT = "OK"   RESPONSE = "336"
ATI1    RESULT = "OK"   RESPONSE = "178"
ATI2    RESULT = "OK"   RESPONSE = "OK"
ATI3    RESULT = "OK"   RESPONSE = "E.C.  Version : T"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAE=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAE? RESULT = "OK"   RESPONSE = "0"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,14
5,146"
AT+FRM=?        RESULT = "OK"   RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,14
5,146"
AT+FTS=?        RESULT = "AT+FTS=?"     RESPONSE = ""
AT+FRS=?        RESULT = "AT+FRS=?"     RESPONSE = ""

Class 2 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=2     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "2"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAXERR=?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAXERR?      RESULT = "OK"   RESPONSE = "0"
AT+FBADLIN=?    RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADLIN?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADMUL=?    RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADMUL?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBOR=?       RESULT = "OK"   RESPONSE = "0,1"
AT+FBOR?        RESULT = "OK"   RESPONSE = "0"
AT+FBUF=?       RESULT = "ERROR"        RESPONSE = "ERROR"
:AT+FBUF?        RESULT = "OK"   RESPONSE = "1024,506,500,0"
AT+FBUG=?       RESULT = "OK"   RESPONSE = "0"
AT+FBUG?        RESULT = "OK"   RESPONSE = "0"
AT+FCIG=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCIG?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCR=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FCR? RESULT = "OK"   RESPONSE = "0"
AT+FTBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDCC=?       RESULT = "OK"   RESPONSE =
"(0,1),(0-5),(0-3),(0-2),(0),(0),(0),
(0-7)"
AT+FDCC?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDCS=?       RESULT = "OK"   RESPONSE =
"(0,1),(0-5),(0-3),(0-2),(0),(0),(0),
(0-7)"
AT+FDCS?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDIS=?       RESULT = "OK"   RESPONSE =
"(0,1),(0-5),(0-3),(0-2),(0),(0),(0),
(0-7)"
AT+FDIS?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDT=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDT? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FECM=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FECM?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FET=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FET? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLID=?       RESULT = "OK"   RESPONSE = "(20),(32-127)"
AT+FLID?        RESULT = "OK"   RESPONSE = "OK"
AT+FLNFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLNFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLPL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
:
AT+FLPL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMDL?        RESULT = "OK"   RESPONSE = "ROCKWELL 288DPI"
AT+FMFR?        RESULT = "OK"   RESPONSE = "GVC"
AT+FMINSP=?     RESULT = "OK"   RESPONSE = "000"
AT+FMINSP?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPHCTO=?     RESULT = "OK"   RESPONSE = "000"
AT+FPHCTO?      RESULT = "OK"   RESPONSE = "OK"
AT+FPTS=?       RESULT = "OK"   RESPONSE = "000"
AT+FPTS?        RESULT = "OK"   RESPONSE = "OK"
AT+FRBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREV?        RESULT = "OK"   RESPONSE = "KA1131-00"
AT+FSPL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSPL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FVRFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FVRFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FWDFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FWDFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FK=? RESULT = "OK"   RESPONSE = "000"
(END)