flexfax: RE: Moving hylafax outside a firewall

["Andrew Webb" <andrew.webb@rdel.co.uk>]

Jamie,

	Well, I opened all the TCP/IP ports in to the main net from the Hylafax
server in the DMZ and now it works fine. Problem is, that kind of defeats
the object of putting it outside the firewall in the first place ! So, there
must be some other TCP ports that are required for some purpose other than
4558 and 4559. Any ideas ?

Andy

.....................................................................

Hi Andy
This message was forwarded by a colleague, as I am not on your list.
Your problem could be caused by a few things, but I'd be checking your
TCP/IP config. Make sure your default gateway, IP address and mask are
appropriate for the segment it is now connected to.

Good Luck

Cheers, Jamie.