HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Hylafax Init String?



Hello there,

I'm having a problem with Hylafax and a Rockwell-chipset based modem
(Chipset is Rockwell 144DP). When having send a fax to the hylafax server
using WHFC the initalising - and - dialing procedure starts. But there is a
severe error occuring:

Apr 29 22:45:12 aquarium FaxSend[1150]: DELAY 2600 ms
Apr 29 22:45:15 aquarium FaxSend[1150]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 29 22:45:15 aquarium FaxSend[1150]: --> [5:ERROR]
Apr 29 22:45:15 aquarium FaxSend[1150]: MODEM Command error
Apr 29 22:45:15 aquarium FaxSend[1150]: DELAY 2600 ms
Apr 29 22:45:18 aquarium FaxSend[1150]: <-- [15:ATE0V1Q0S0=0H0\r]
Apr 29 22:45:18 aquarium FaxQueuer[381]: MODEM /dev/ttyS1 appears to be
wedged
Apr 29 22:45:18 aquarium FaxQueuer[381]: MODEM WEDGED: bin/wedged "ttyS1"
"/dev/ttyS1"
Apr 29 22:45:18 aquarium FaxSend[1150]: --> [5:ERROR]
Apr 29 22:45:18 aquarium FaxSend[1150]: MODEM Command error
Apr 29 22:45:18 aquarium FaxSend[1150]: Unable to setup modem on /dev/ttyS1;
giving up

I installed the modem using "faxaddmodem" and it went through autoprobing
its features and was configured using Class 2.

Can anyone of you give me a hint, where I can correct this init-string?
Because only the S0=0 causes the error. The rest of the string is accepted
by the modem.

Thanks in advance (I'm using the binary version v4.0pl2-31)


Dominik Roettsches
e-mail: DRoettsches@tkc.de
see also: http://privat.schlund.de/dr/
ICQ: 1570287




Project hosted by iFAX Solutions