 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- To: flexfax@sgi.com
- Subject: flexfax: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- From: Bernd Broermann <info@broermann.com>
- Date: Fri, 5 Mar 1999 23:49:54 +0100
Hi, I want to run Hylafax 4.0pl2 From SuSE Distribution Kernel 2.0.36 SMP machine. I decide to use the ZYXEL Modem( U1496EG V 6.19 ) in the supported List. I installed it, disabled ECM and run it with class2.0 and later for class1 . There are is a funny behavior when i send a multi page fax: some pages are sent multiple times, but there is no reguarity. The doneq stats for example 2 of 2 pages , but the second is double. When sending a second time the fax is ok. Some faxes are aborted with errors shown below. Can you help me because I am going to buy another modem and I dont know if its the right way. Regards, cu bernd -- Broermann Technologie Beratung http://www.opensource.de << Open Source for your business >> ------------------------------------------------------------------------------ class2.0 errors brief: No response to MPS repeated 3 or Failure to train at 2400 or Mar 02 16:41:43.71: [18911]: SEND begin page Mar 02 16:41:48.17: [18911]: SENT 13925 bytes of data Mar 02 16:41:48.17: [18911]: SEND 1D RTC Mar 02 16:41:48.17: [18911]: SEND end page Mar 02 16:41:48.17: [18911]: SEND send MPS (more pages, same document) Mar 02 16:42:02.59: [18911]: --> [5:ERROR] Mar 02 16:42:02.60: [18911]: SEND recv RTN (retrain negative) Mar 02 16:42:02.60: [18911]: <-- [7:AT+FKS\r] Mar 02 16:42:04.08: [18911]: --> [7:+FHS:02] Mar 02 16:42:04.08: [18911]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (co de 2) Mar 02 16:42:04.08: [18911]: --> [5:ERROR] --------------------------------------------------------------------------------------- class1 error MULTIPLE PAGE detailed : Mar 4 16:56:45 linux-2.0.36 HylaFAX[3698]: Filesystem has SysV-style file creation semantics. Mar 4 16:56:45 linux-2.0.36 FaxQueuer[25579]: SUBMIT JOB 187 Mar 4 16:56:45 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:59:00): PREPARE START Mar 4 16:56:45 linux-2.0.36 FaxQueuer[3703]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o docq/doc199.ps;40 -r 98 -w 1728 -l 297 -m 30 -2 docq/doc199.ps.187 Mar 4 16:56:47 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:58:58): PREPARE DONE Mar 4 16:56:47 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:58:58): CMD START /usr/lib/fax/faxsend -m modem sendq/q187 (PID 3712) Mar 4 16:56:47 linux-2.0.36 FaxSend[3712]: MODEM set DTR OFF Mar 4 16:56:47 linux-2.0.36 FaxSend[3712]: DELAY 2600 ms Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM set DTR ON Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM flush i/o Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [34:AT&B1&N0&S0*F0S38.3=1E0V1Q0S0=0H0\r] Mar 4 16:56:50 linux-2.0.36 FaxGetty[27650]: ANSWER: Can not lock modem device Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [21:ATS8=2S7=60&H3&D2&C1\r] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=?\r] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [13:0,1,2,2.0,6,8] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=1\r] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FMFR?\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [5:ZyXEL] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FREV?\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [18:U1496EG V 6.19 M ] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FTM=?\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FRM=?\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=1\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FAA=1\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: MODEM ZYXEL /U1496EG V 6.19 M Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [5:ATM0\r] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK] Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: MODEM input buffering disabled Mar 4 16:56:51 linux-2.0.36 FaxSend[3712]: SEND FAX: JOB 187 DEST 0xxxxxxxxx COMMID 00000309 Mar 4 16:59:32 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:56:13): CMD DONE: exit status 0x200 Mar 4 16:59:32 linux-2.0.36 FaxQueuer[25579]: JOB 187 (done dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:56:13): SEND DONE: 2:45 Mar 4 16:59:32 linux-2.0.36 FaxQueuer[25579]: NOTIFY: bin/notify "doneq/q187" "done" "2:45" Mar 4 16:59:50 linux-2.0.36 FaxGetty[27650]: MODEM set DTR OFF Mar 4 16:59:50 linux-2.0.36 FaxGetty[27650]: DELAY 2600 ms Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM set DTR ON Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM flush i/o Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [34:AT&B1&N0&S0*F0S38.3=1E0V1Q0S0=0H0\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [21:ATS8=2S7=60&H3&D2&C1\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=?\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [13:0,1,2,2.0,6,8] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=1\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FMFR?\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [5:ZyXEL] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FREV?\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [18:U1496EG V 6.19 M ] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FTM=?\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FRM=?\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=1\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FAA=1\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM ZYXEL /U1496EG V 6.19 M Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [5:ATM0\r] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK] Mar 4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM input buffering disabled
- Follow-Ups:
- Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- From: David Woolley <david@djwhome.demon.co.uk>
- Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- Prev by Date: Re: received pages not A4
- Next by Date: Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- Prev by thread: Loosing lines of a fax
- Next by thread: Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
- Index(es):
Project hosted by iFAX Solutions