HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2-D MR data format ...



> > For some reason the program associated with TIF in Windows (wang
> > imaging) cannot read the TIFs in 2-D MR data format -- is there any way
> > to force hylafax to use the 1-D MR format?
> 
> I forgot to mention - I am using a Multitech 2834 which is obviously
> capable of 2d encoding - this recently replaced a Sportster 14.4 which
> did not so it was never a problem.  I can't find any reference to 1-D or
> 2-D encoding in config.cua1 or man faxgetty nor the multitech manual and
> ony a few vague references on the hylafax web site ... I really need to
> turn this feature OFF - non of our image programs can read the resulting
> TIFFs!!!

Add the following line to the end of your config.tty* file:

Class2DCCQueryCmd:     "!(0,1),(0-5),(0-4),(0-2),(0),(0),(0),(0-7)"

You may find you have problems receiving faxes from certain Canon fax
machines.  In this case, modify the line above to:

Class2DCCQueryCmd:     "!(0,1),(0-3),(0-4),(0-2),(0),(0),(0),(0-7)"
                                  ^

This limits the speed of fax transmission to 9600 baud from 14400.
More information about these parameters can be found at
http://www.hylafax.org/setup-advanced.php#Class2Liars

Martin Renters




Project hosted by iFAX Solutions