HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Trouble with sending faxes to particular places.



Hello.

HylaFAX version is: 4.0pl1 (binary distribution for RedHat, probably
4.0beta06)
OS is: RedHat 5.1
Modem is: Zyxel 2864 Elite, firmware V. 1.19

The script below reports errors. In fact, the fax was received by remote
fax machine three times. Becouse HylaFAX thought, that it was not done, it
has sent the fascimile few more times, each time the result was the same.
Does anybody know, what the problem is ?

Dec 08 16:15:04.35: [29610]: SESSION BEGIN 00000034 482298686622
Dec 08 16:15:04.36: [29610]: SEND FAX: JOB 32 DEST 9,8686622 COMMID 00000034
Dec 08 16:15:04.36: [29610]: DELAY 2600 ms
Dec 08 16:15:06.96: [29610]: <-- [39:AT&B1&N0&S0*F0S18=4S38.3=1E0V1Q0S0=0H0\r]
Dec 08 16:15:07.13: [29610]: --> [2:OK]
Dec 08 16:15:07.13: [29610]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Dec 08 16:15:07.15: [29610]: --> [2:OK]
Dec 08 16:15:07.15: [29610]: <-- [14:AT+FCLASS=2.0\r]
Dec 08 16:15:07.16: [29610]: --> [2:OK]
Dec 08 16:15:07.16: [29610]: <-- [9:AT+FLO=2\r]
Dec 08 16:15:07.17: [29610]: --> [2:OK]
Dec 08 16:15:07.17: [29610]: <-- [9:AT+FPP=0\r]
Dec 08 16:15:07.18: [29610]: --> [2:OK]
Dec 08 16:15:07.18: [29610]: <-- [9:AT+FBO=0\r]
Dec 08 16:15:07.19: [29610]: --> [2:OK]
Dec 08 16:15:07.19: [29610]: <-- [10:AT+FCT=30\r]
Dec 08 16:15:07.20: [29610]: --> [2:OK]
Dec 08 16:15:07.20: [29610]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 08 16:15:07.21: [29610]: --> [2:OK]
Dec 08 16:15:07.21: [29610]: <-- [9:AT+FIE=0\r]
Dec 08 16:15:07.22: [29610]: --> [2:OK]
Dec 08 16:15:07.22: [29610]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 08 16:15:07.24: [29610]: --> [2:OK]
Dec 08 16:15:07.24: [29610]: <-- [7:ATM1L1\r]
Dec 08 16:15:07.25: [29610]: --> [2:OK]
Dec 08 16:15:07.25: [29610]: <-- [14:AT+FCLASS=2.0\r]
Dec 08 16:15:07.36: [29610]: --> [2:OK]
Dec 08 16:15:07.36: [29610]: <-- [9:AT+FLO=2\r]
Dec 08 16:15:07.47: [29610]: --> [2:OK]
Dec 08 16:15:07.47: [29610]: <-- [9:AT+FPP=0\r]
Dec 08 16:15:07.58: [29610]: --> [2:OK]
Dec 08 16:15:07.58: [29610]: <-- [9:AT+FBO=0\r]
Dec 08 16:15:07.69: [29610]: --> [2:OK]
Dec 08 16:15:07.69: [29610]: <-- [10:AT+FCT=30\r]
Dec 08 16:15:07.80: [29610]: --> [2:OK]
Dec 08 16:15:07.80: [29610]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 08 16:15:07.91: [29610]: --> [2:OK]
Dec 08 16:15:07.91: [29610]: <-- [9:AT+FIE=0\r]
Dec 08 16:15:08.02: [29610]: --> [2:OK]
Dec 08 16:15:08.02: [29610]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 08 16:15:08.14: [29610]: --> [2:OK]
Dec 08 16:15:08.14: [29610]: <-- [30:AT+FLI="Optimum Distribution"\r]
Dec 08 16:15:08.26: [29610]: --> [2:OK]
Dec 08 16:15:08.26: [29610]: DIAL 9,8686622
Dec 08 16:15:08.26: [29610]: <-- [14:ATDT9,8686622\r]
Dec 08 16:15:32.60: [29610]: --> [4:+FCO]
Dec 08 16:15:32.60: [29610]: --> [112:+FNF:00 00 11 80 00 80 49 10 4D 49 43 52
4F 53 59 53 54 45 4D 53 20 20 20 20 00 4D 00 80 80 C0 06 01 01 01 01   ]
Dec 08 16:15:32.60: [29610]: REMOTE NSF "00 00 11 80 00 80 49 10 4D 49 43
52 4F
53 59 53 54 45 4D 53 20 20 20 20 00 4D 00 80 80 C0 06 01 01 01 01"
Dec 08 16:15:32.72: [29610]: --> [26:+FCI:           868 66 22 ]
Dec 08 16:15:32.72: [29610]: REMOTE CSI "868 66 22"
Dec 08 16:15:32.72: [29610]: --> [20:+FIS:1,3,0,2,1,1,0,5]
Dec 08 16:15:32.72: [29610]: --> [2:OK]
Dec 08 16:15:32.72: [29610]: REMOTE best rate 9600 bit/s
Dec 08 16:15:32.72: [29610]: REMOTE max page width 1728 pixels in 215 mm
Dec 08 16:15:32.72: [29610]: REMOTE max unlimited page length
Dec 08 16:15:32.72: [29610]: REMOTE best vres 7.7 line/mm
Dec 08 16:15:32.72: [29610]: REMOTE best format 2-D MR
Dec 08 16:15:32.72: [29610]: REMOTE supports T.30 Annex A, ECM
Dec 08 16:15:32.72: [29610]: REMOTE best 20 ms/scanline
Dec 08 16:15:32.72: [29610]: USE 9600 bit/s
Dec 08 16:15:32.72: [29610]: USE 20 ms/scanline
Dec 08 16:15:32.72: [29610]: SEND file "docq/doc32.ps;01"
Dec 08 16:15:32.72: [29610]: USE page width 1728 pixels in 215 mm
Dec 08 16:15:32.73: [29610]: USE unlimited page length
Dec 08 16:15:32.73: [29610]: USE 7.7 line/mm
Dec 08 16:15:32.73: [29610]: USE 1-D MR
Dec 08 16:15:32.73: [29610]: <-- [23:AT+FIS=1,3,0,2,0,0,0,5\r]
Dec 08 16:15:32.84: [29610]: --> [2:OK]
Dec 08 16:15:32.84: [29610]: <-- [7:AT+FDT\r]
Dec 08 16:15:38.49: [29610]: --> [20:+FCS:1,3,0,2,0,0,0,5]
Dec 08 16:15:39.03: [29610]: --> [7:CONNECT]
Dec 08 16:15:39.03: [29610]: SEND begin page
Dec 08 16:16:13.00: [29610]: SENT 32483 bytes of data
Dec 08 16:16:13.00: [29610]: SEND 1D RTC
Dec 08 16:16:13.00: [29610]: SEND end page
Dec 08 16:16:13.00: [29610]: SEND send EOP (no more pages or documents)
Dec 08 16:16:37.62: [29610]: --> [5:ERROR]
Dec 08 16:16:37.62: [29610]: SEND recv RTN (retrain negative)
Dec 08 16:16:37.62: [29610]: <-- [7:AT+FDT\r]
Dec 08 16:16:43.27: [29610]: --> [20:+FCS:1,3,0,2,0,0,0,5]
Dec 08 16:16:43.81: [29610]: --> [7:CONNECT]
Dec 08 16:16:43.81: [29610]: SEND begin page
Dec 08 16:17:17.78: [29610]: SENT 32483 bytes of data
Dec 08 16:17:17.78: [29610]: SEND 1D RTC
Dec 08 16:17:17.78: [29610]: SEND end page
Dec 08 16:17:17.78: [29610]: SEND send EOP (no more pages or documents)
Dec 08 16:17:42.40: [29610]: --> [5:ERROR]
Dec 08 16:17:42.40: [29610]: SEND recv RTN (retrain negative)
Dec 08 16:17:42.40: [29610]: <-- [7:AT+FDT\r]
Dec 08 16:17:48.06: [29610]: --> [20:+FCS:1,3,0,2,0,0,0,5]
Dec 08 16:17:48.59: [29610]: --> [7:CONNECT]
Dec 08 16:17:48.59: [29610]: SEND begin page
Dec 08 16:18:22.56: [29610]: SENT 32483 bytes of data
Dec 08 16:18:22.56: [29610]: SEND 1D RTC
Dec 08 16:18:22.56: [29610]: SEND end page
Dec 08 16:18:22.56: [29610]: SEND send EOP (no more pages or documents)
Dec 08 16:18:47.18: [29610]: --> [5:ERROR]
Dec 08 16:18:47.18: [29610]: SEND recv RTN (retrain negative)
Dec 08 16:18:47.18: [29610]: <-- [7:AT+FKS\r]
Dec 08 16:18:48.63: [29610]: --> [7:+FHS:02]
Dec 08 16:18:48.63: [29610]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Dec 08 16:18:48.63: [29610]: --> [5:ERROR]
Dec 08 16:18:48.63: [29610]: MODEM Command error
Dec 08 16:18:48.63: [29610]: <-- [5:ATH0\r]
Dec 08 16:18:48.82: [29610]: --> [10:NO CARRIER]
Dec 08 16:18:48.82: [29610]: MODEM No carrier
Dec 08 16:18:48.82: [29610]: SESSION END

A bus station is where a bus stops. A train station is where 
a train stops. On my desk I have a work station... 
(Author unknown)

| Artur Uszynski                            | e-mail adresses:
| Optimum Distribution Sp. z o.o.           | arus@opt.com.pl
| ul. Poleczki 21, 02-822 Warszaw, Poland   | arus@polbox.com
| tel. +48225451441, fax +48225451403       | arus@friko.onet.pl




Project hosted by iFAX Solutions