Re: flexfax: Failed job also

[David Woolley <david@djwhome.demon.co.uk>]

> Oct 18 13:56:57.87: [ 7731]: --> [7:CONNECT]
> Oct 18 13:56:57.87: [ 7731]: SEND begin page
> Oct 18 13:56:57.87: [ 7731]: <-- data [1029]
> Oct 18 13:56:57.87: [ 7731]: <-- data [1032]
> Oct 18 13:56:57.87: [ 7731]: <-- data [1032]
> Oct 18 13:56:57.87: [ 7731]: <-- data [1030]
> Oct 18 13:56:59.59: [ 7731]: <-- data [1033]

You cut this off just where it was getting interesting.  You have transmitted
about 4096 bytes in 1.72 seconds, which would definitely be an overrun
(2,381 bytes a second) except that the transmission appears to have slowed
down for the last one, so the initial ones may just be buffer priming.
An average page should be about 25K, so look around the 20th to 25th to
see if the average is compatible with the negotiated speed, remembering
that you have to multiply by a little over 1.25 to allow for start and
stop bits and escape codes.