flexfax: Hylafax only sending a few lines of my faxes.Please Help

[Eduardo Jacob Fuentealba <efr611@nis.com.au>]

Hello everyone,

I just install  HylaFAX v4.0 under SCO OS5 ; using a  Rockwell RC288DPi
based class 2 Modem.
 
I have a 'little' problem ...........:

Every fax that I send , I can't not get more than a few lines on the
receiving fax machine ??.
for instance i sent a fax using the default cover page and I only got
the silicon graphics logo and nothing else on the cover, and a2 or 3
lines of the actual fax..
 
I have viewed the docs created by textfmt with ghostview and they are OK
ie all the in formation is in the ps file.
 
Any help would be very much appreciate.

regards

Eduardo

PS .- Here's the log file 

Oct 13 16:07:06.23: [ 4698]: SESSION BEGIN 00000033 10295889510
Oct 13 16:07:06.23: [ 4698]: SEND FAX: JOB 45 DEST 95889510 COMMID 00000033
Oct 13 16:07:06.48: [ 4698]: DELAY 2600 ms
Oct 13 16:07:09.21: [ 4698]: <-- [15:ATE0V1Q0S0=0H0\r]
Oct 13 16:07:09.43: [ 4698]: --> [14:ATE0V1Q0S0=0H0]
Oct 13 16:07:09.43: [ 4698]: --> [2:OK]
Oct 13 16:07:09.43: [ 4698]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
Oct 13 16:07:09.61: [ 4698]: --> [2:OK]
Oct 13 16:07:09.61: [ 4698]: <-- [12:AT+FCLASS=2\r]
Oct 13 16:07:09.78: [ 4698]: --> [2:OK]
Oct 13 16:07:09.78: [ 4698]: <-- [10:AT+FTBC=0\r]
Oct 13 16:07:09.95: [ 4698]: --> [2:OK]
Oct 13 16:07:09.95: [ 4698]: <-- [10:AT+FBOR=0\r]
Oct 13 16:07:10.12: [ 4698]: --> [2:OK]
Oct 13 16:07:10.12: [ 4698]: <-- [13:AT+FPHCTO=30\r]
Oct 13 16:07:10.29: [ 4698]: --> [2:OK]
Oct 13 16:07:10.29: [ 4698]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Oct 13 16:07:10.47: [ 4698]: --> [2:OK]
Oct 13 16:07:10.47: [ 4698]: <-- [5:ATM0\r]
Oct 13 16:07:10.65: [ 4698]: --> [2:OK]
Oct 13 16:07:10.67: [ 4698]: <-- [12:AT+FCLASS=2\r]
Oct 13 16:07:10.93: [ 4698]: --> [2:OK]
Oct 13 16:07:10.93: [ 4698]: <-- [10:AT+FTBC=0\r]
Oct 13 16:07:11.30: [ 4698]: --> [2:OK]
Oct 13 16:07:11.30: [ 4698]: <-- [10:AT+FBOR=0\r]
Oct 13 16:07:11.56: [ 4698]: --> [2:OK]
Oct 13 16:07:11.56: [ 4698]: <-- [13:AT+FPHCTO=30\r]
Oct 13 16:07:11.82: [ 4698]: --> [2:OK]
Oct 13 16:07:11.82: [ 4698]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Oct 13 16:07:12.09: [ 4698]: --> [2:OK]
Oct 13 16:07:12.09: [ 4698]: <-- [31:AT+FLID="Newmans Information "\r]
Oct 13 16:07:12.36: [ 4698]: --> [2:OK]
Oct 13 16:07:12.41: [ 4698]: DIAL 95889510
Oct 13 16:07:12.41: [ 4698]: <-- [14:ATDT95889510@\r]
Oct 13 16:07:27.34: [ 4698]: --> [5:+FCON]
Oct 13 16:07:30.37: [ 4698]: --> [108:+FNSF:00 00 31 00 4E B8 00 84 0D DD
00 00 DD DD 00 00 DD DD DD DD DD 98 10 13 02 16 10 07 ED 22 90 00 00 10 ]
Oct 13 16:07:30.37: [ 4698]: REMOTE NSF "00 00 31 00 4E B8 00 84 0D DD 00
00 DD DD 00 00 DD DD DD DD DD 98 10 13 02 16 10 07 ED 22 90 00 00 10"
Oct 13 16:07:30.48: [ 4698]: --> [28:+FCSI:"        02 9588 9510"]
Oct 13 16:07:30.48: [ 4698]: REMOTE CSI "02 9588 9510"
Oct 13 16:07:30.48: [ 4698]: --> [21:+FDIS:1,3,0,2,0,0,0,4]
Oct 13 16:07:30.48: [ 4698]: --> [2:OK]
Oct 13 16:07:30.48: [ 4698]: REMOTE best rate 9600 bit/s
Oct 13 16:07:30.48: [ 4698]: REMOTE max page width 1728 pixels in 215 mm
Oct 13 16:07:30.48: [ 4698]: REMOTE max unlimited page length 
Oct 13 16:07:30.48: [ 4698]: REMOTE best vres 7.7 line/mm
Oct 13 16:07:30.48: [ 4698]: REMOTE best format 1-D MR
Oct 13 16:07:30.48: [ 4698]: REMOTE best 20 ms, 10 ms/scanline
Oct 13 16:07:30.48: [ 4698]: USE 9600 bit/s
Oct 13 16:07:30.48: [ 4698]: USE 20 ms, 10 ms/scanline
Oct 13 16:07:30.48: [ 4698]: SEND file "docq/doc55.ps;30"
Oct 13 16:07:30.56: [ 4698]: USE page width 1728 pixels in 215 mm
Oct 13 16:07:30.56: [ 4698]: USE unlimited page length 
Oct 13 16:07:30.56: [ 4698]: USE 3.85 line/mm
Oct 13 16:07:30.56: [ 4698]: USE 1-D MR
Oct 13 16:07:30.56: [ 4698]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,4\r]
Oct 13 16:07:30.83: [ 4698]: --> [2:OK]
Oct 13 16:07:30.83: [ 4698]: <-- [7:AT+FDT\r]
Oct 13 16:07:36.67: [ 4698]: --> [21:+FDCS:0,3,0,2,0,0,0,5]
Oct 13 16:07:36.67: [ 4698]: --> [7:CONNECT]
Oct 13 16:07:36.67: [ 4698]: SEND wait for XON
Oct 13 16:07:36.67: [ 4698]: --> [1: ]
Oct 13 16:07:36.67: [ 4698]: SEND begin page
Oct 13 16:07:36.71: [ 4698]: <-- data [1034]
Oct 13 16:07:36.94: [ 4698]: <-- data [1026]
Oct 13 16:07:37.21: [ 4698]: <-- data [1029]
Oct 13 16:07:37.48: [ 4698]: <-- data [1026]
Oct 13 16:07:37.75: [ 4698]: <-- data [1025]
Oct 13 16:07:38.01: [ 4698]: <-- data [1028]
Oct 13 16:07:38.28: [ 4698]: <-- data [1029]
Oct 13 16:07:38.55: [ 4698]: <-- data [1028]
Oct 13 16:07:38.82: [ 4698]: <-- data [1027]
Oct 13 16:07:39.08: [ 4698]: <-- data [532]
Oct 13 16:07:39.22: [ 4698]: SENT 9743 bytes of data
Oct 13 16:07:39.22: [ 4698]: <-- data [2]
Oct 13 16:07:39.22: [ 4698]: SEND end page
Oct 13 16:07:43.90: [ 4698]: --> [2:  ]
Oct 13 16:07:43.90: [ 4698]: --> [2:OK]
Oct 13 16:07:43.90: [ 4698]: SEND send EOP (no more pages or documents)
Oct 13 16:07:43.92: [ 4698]: <-- [9:AT+FET=2\r]
Oct 13 16:07:51.76: [ 4698]: --> [7:+FPTS:1]
Oct 13 16:07:51.76: [ 4698]: SEND recv MCF (message confirmation)
Oct 13 16:07:51.76: [ 4698]: SEND FAX (00000033): FROM root@nisdev TO
95889510 (page 1 of 1 sent in 0:21)
Oct 13 16:07:51.76: [ 4698]: SEND FAX (00000033): FROM root@nisdev TO
95889510 (docq/doc55.ps;30 sent in 0:21)
Oct 13 16:07:51.76: [ 4698]: <-- [5:ATH0\r]
Oct 13 16:07:53.23: [ 4698]: --> [7:+FHNG:0]
Oct 13 16:07:53.23: [ 4698]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Oct 13 16:07:53.87: [ 4698]: --> [2:OK]
Oct 13 16:07:54.24: [ 4698]: SESSION EN