flexfax: Phase B Error

[System Administrator <admin@interlink.com.ni>]

Hello all,
I use a Sporster 28.8 on Hylafax 4.0pl2 / BSDI 2.1 system,
i obtained this error, that i dont know how resolve it
T
Thanks for help me.


Oct 03 11:20:35.63: [17195]: SESSION BEGIN 00000124 2653107
Oct 03 11:20:35.64: [17195]: SEND FAX: JOB 15 DEST 2653107 COMMID 00000124
Oct 03 11:20:35.64: [17195]: DELAY 2600 ms
Oct 03 11:20:38.24: [17195]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Oct 03 11:20:38.38: [17195]: --> [16:ATE0V1Q0X4S0=0H0]
Oct 03 11:20:38.38: [17195]: --> [2:OK]
Oct 03 11:20:38.38: [17195]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Oct 03 11:20:38.53: [17195]: --> [2:OK]
Oct 03 11:20:38.53: [17195]: <-- [14:AT+FCLASS=2.0\r]
Oct 03 11:20:38.68: [17195]: --> [2:OK]
Oct 03 11:20:38.68: [17195]: <-- [9:AT+FLO=2\r]
Oct 03 11:20:38.83: [17195]: --> [2:OK]
Oct 03 11:20:38.83: [17195]: <-- [9:AT+FPP=0\r]
Oct 03 11:20:38.98: [17195]: --> [2:OK]
Oct 03 11:20:38.98: [17195]: <-- [9:AT+FBO=0\r]
Oct 03 11:20:39.13: [17195]: --> [2:OK]
Oct 03 11:20:39.13: [17195]: <-- [10:AT+FCT=30\r]
Oct 03 11:20:39.28: [17195]: --> [2:OK]
Oct 03 11:20:39.28: [17195]: <-- [15:AT+FNR=1,1,1,1\r]
Oct 03 11:20:39.43: [17195]: --> [2:OK]
Oct 03 11:20:39.43: [17195]: <-- [9:AT+FIE=0\r]
Oct 03 11:20:39.57: [17195]: --> [2:OK]
Oct 03 11:20:39.57: [17195]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 03 11:20:39.72: [17195]: --> [2:OK]
Oct 03 11:20:39.72: [17195]: <-- [5:ATM1\r]
Oct 03 11:20:39.86: [17195]: --> [2:OK]
Oct 03 11:20:39.90: [17195]: <-- [14:AT+FCLASS=2.0\r]
Oct 03 11:20:40.15: [17195]: --> [2:OK]
Oct 03 11:20:40.15: [17195]: <-- [9:AT+FLO=2\r]
Oct 03 11:20:40.39: [17195]: --> [2:OK]
Oct 03 11:20:40.39: [17195]: <-- [9:AT+FPP=0\r]
Oct 03 11:20:40.63: [17195]: --> [2:OK]
Oct 03 11:20:40.63: [17195]: <-- [9:AT+FBO=0\r]
Oct 03 11:20:40.87: [17195]: --> [2:OK]
Oct 03 11:20:40.87: [17195]: <-- [10:AT+FCT=30\r]
Oct 03 11:20:41.11: [17195]: --> [2:OK]
Oct 03 11:20:41.11: [17195]: <-- [15:AT+FNR=1,1,1,1\r]
Oct 03 11:20:41.35: [17195]: --> [2:OK]
Oct 03 11:20:41.35: [17195]: <-- [9:AT+FIE=0\r]
Oct 03 11:20:41.59: [17195]: --> [2:OK]
Oct 03 11:20:41.59: [17195]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Oct 03 11:20:41.83: [17195]: --> [2:OK]
Oct 03 11:20:41.83: [17195]: <-- [19:AT+FLI="INTERLINK"\r]
Oct 03 11:20:42.07: [17195]: --> [2:OK]
Oct 03 11:20:42.10: [17195]: DIAL 2653107
Oct 03 11:20:42.10: [17195]: <-- [12:ATDT2653107\r]
Oct 03 11:21:05.23: [17195]: --> [4:+FCO]
Oct 03 11:21:08.03: [17195]: --> [16:+FNF:+FCI:" 50]
Oct 03 11:21:08.03: [17195]: REMOTE NSF "+FCI:" 50"
Oct 03 11:21:08.03: [17195]: --> [45: 2653107        "+FIS:1,5,2,2,0,0,0,0]
Oct 03 11:21:48.03: [17195]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Oct 03 11:21:48.03: [17195]: SEND FAILED: Unspecified Transmit Phase B error
Oct 03 11:21:48.03: [17195]: <-- [5:ATH0\r]
Oct 03 11:21:48.26: [17195]: --> [4:ATH0]
Oct 03 11:21:48.26: [17195]: --> [2:OK]
Oct 03 11:21:48.27: [17195]: SESSION END


Iris Silva