HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Modem uses only 1-D format



Hi,

i have a small problem with a setup of HylaFAX 4.0p2 on Linux 2.0.33
with a Zyxel modem.

HylaFAX uses only 1-D compression for sending faxes. I have put
the following parameter to ../etc/config : "Use2D:  Yes" 
and i have tried the parameter also in ../etc/config.ttyS1. But HylaFAX
uses only 1-D compression :

May 28 16:54:24.73: [12702]: REMOTE best rate 9600 bit/s
May 28 16:54:24.73: [12702]: REMOTE max page width 1728 pixels in 215 mm
May 28 16:54:24.73: [12702]: REMOTE max unlimited page length
May 28 16:54:24.73: [12702]: REMOTE best vres 7.7 line/mm
May 28 16:54:24.73: [12702]: REMOTE best format 2-D MR
May 28 16:54:24.73: [12702]: REMOTE supports T.30 Annex A, ECM
May 28 16:54:24.73: [12702]: REMOTE best 10 ms/scanline
May 28 16:54:24.73: [12702]: USE 9600 bit/s
May 28 16:54:24.73: [12702]: USE 10 ms/scanline
May 28 16:54:24.73: [12702]: SEND file "docq/doc27328.ps;01"
May 28 16:54:24.73: [12702]: USE page width 1728 pixels in 215 mm
May 28 16:54:24.73: [12702]: USE unlimited page length
May 28 16:54:24.73: [12702]: USE 7.7 line/mm
May 28 16:54:24.73: [12702]: USE 1-D MR   

Do i have to set an other parameter for using 2-D compression or
is this a limitation of the Zyxel Modem ?

Uli                
-- 
Ulrich Eckhardt       http://people.frankfurt.netsurf.de/uli
Signalgroßtat des wu-ftpd 2,4 (unvollständig?)
Cgi-Sicherheitsbohrung in EWS (regen Sie für Webservers auf)
[Translation from an english text to german by AltaVista]




Project hosted by iFAX Solutions