HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Fax jobs queued only for one port




This is because you're sending faxes to a single
number! The fax server realizes that the queued job
has the same destination and since the destination is
busy with the previous job, it queues it up on the
same port.

Try sending to different numbers and it'll use both
the ports. 

Enjoy!

Vinay Doma
vdoma@rocketmail.com




---Alain Berger <bga@payserv.telekurs.com> wrote:
>
> Hi everybody,
> 
> I'm new to the list, so I hope this is not an
already answered question:
> 
> My "send-only" environment:
> SunOS 5.6 (Solaris 2.6.1) Generic sun4m sparc
SUNW,SPARCstation-5
> 2 Zyxel Modems U1496E+, V 6.20 P
> hylafax-sparc-sunos5.5-v4.0pl1-pkg
> Ghostscript 5.10
> 
> After the basic installation (faxsetup, config-file
"zyxel-1496e-2.0",
> faxmodem), it runs o.k. (although I don't get the
modem-status "running and
> idle") except queueing of multiple fax jobs - all
jobs are queued only for
> port b (cua/b).
> 
> output of "faxstat -s":
> HylaFax scheduler on faxzh1: Running
> Modem cua/a (Fax-Number): Waiting for modem to come
ready
> Modem cua/b (Fax-Number): Waiting for modem to come
ready
> 
> output of "faxstat -s" with 2 queued jobs:
> HylaFax scheduler on faxzh1: Running
> Modem cua/a (Fax-Number): Waiting for modem to come
ready
> Modem cua/b (Fax-Number): Sending job 64
> 
> JID Pri S Owner Number	Pages Dials	TTS Status
> 64  127	R   fax 4467461  0:1   0:12
> 65  127	B   fax 4467461  0:0   0:12	    Blocked by
concurrent job
> 
> 
> With only one modem on port cua/a (faxmodem cua/a)
activated, output of
> "faxstat -s":
> HylaFax scheduler on faxzh1: Running
> Modem cua/a (Fax-Number): Sending job 67
> Modem cua/b (Fax-Number): Waiting for modem to come
ready
> 
> JID Pri S Owner Number	Pages Dials	TTS Status
> 67  127	R   fax 4467461  0:1   0:12
> 
> 
> I tried also different port configurations with the
"admintool"
>   modem - dial out only
>   modem - bidirectional
>   initialize only - no connection
> no effect ...
> 
> I couldn't find any help in the FAQ and other docu's.
> 
> Thanx for any useful hints !
> 
> Cheers,
> 
> -- 
> Alain Berger	                |         Tel: +41 1
279 33 29
> Telekurs Payserv AG             |         Fax: +41
1 446 74 61
> Hardturmstr.201, 8021 Zürich    |      E-Mail:
bga@payserv.ch
> 
> 

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com




Project hosted by iFAX Solutions