HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Unspecified Transmit Phase B error



At 23:08 07/05/1998 -0700, Juan J. Alonso wrote:
>
>Hi there,
>
>I am using HylaFAX v4.0pl1 under IRIX 6.4, binary IRIX 6.2 distribution,
>with a US Robotics Sportster Faxmodem 56k with x2, FLASH 4.1.55, DSP 10.3.55
[snip]
>May 07 22:24:36.78: [ 7171]: <-- [14:AT+FCLASS=2.0\r]
>May 07 22:24:36.93: [ 7171]: --> [2:OK]
>
>(Some stuff deleted)
>
>May 07 22:24:53.49: [ 7171]: --> [19:+FNF:+FNF:+FCI:" ]
>May 07 22:24:53.49: [ 7171]: REMOTE NSF "+FNF:+FCI:""
>May 07 22:24:53.49: [ 7171]: --> [32:    1 650 725 3377"+FIS:1,3,0,2]
>May 07 22:24:53.49: [ 7171]: --> [26:1,0,0,2o]
>May 07 22:24:53.49: [ 7171]: --> [2:OK]
>May 07 22:24:53.49: [ 7171]: REMOTE HANGUP: Unspecified Transmit Phase B
error 
[snip]

Hi, Juan.

These are classic reactions from the broken firmware in USR's recent Sportster
models. I don't think the various workrounds mentioned frequently in this list
will help you with the 56K -x2 model; however, someone on the list did mention
they did get Class 1 working with this modem.

Further details on USR Sportsters please see Robert Colquhoun's page at :-

	http://www.trump.net.au/~rjc/hylafax/usr.php

Oh, and BTW, HylaFAX v4.0pl2 is available and sorts out quite a few problems.

Ciao,
Phil Watkinson,
Boston, UK ~ it's a super summers day today on the East Coast...




Project hosted by iFAX Solutions