flexfax: No Pages sent

[Wolfgang Mettbach <wmettbach@metronet.de>]

Hello,

I thought I had it going, but that was a mistake :-(

After trying to send a fax I got the following message from the facsimile
agent: 

----------------------------------------------------------
Your facsimile job to 05..... was completed successfully.

         Pages: 0
       Quality: Normal
    Page Width: 194 (mm)
   Page Length: 281 (mm)
   Signal Rate: 9600 bit/s
   Data Format: 2-D MMR
Submitted From: enterprise.starfleet.de
         JobID: 5
       GroupID: 5
        CommID: c00000002

Processing time was 0:42.
----------------------------------------------------------

Well, the fax did have more than 0 pages. So what could be wrong?

The HylaFAX server is running, I can get a connection from the Windows-
Client, I can "print" the page (=send it to the fax-server), and the
modem starts dialing. Then I can hear the sound of the remote fax machine
and after a few seconds the modem hangs up again.

The permissions in the spool area are set correctly: all files belong to
uucp.uucp and are readeable and writable.

The modem I use has the following chipset inside:

The biggest chip in there is marked

	Rockwell
	RCV 288DPi
	R6682-24
	© Rockwell 94
	9703 B74283B-6

and the EPROM is labeled 

	246 GM
	V0.30.3

on it. (I am no expert when it comes to telling one chip from another, so
please excuse my "precise" description ;-)

The program "probemodem" tells me the following:

--------------------------------------------------------
This looks like a Class 1+2 modem.

ATI0    RESULT = "OK"   RESPONSE = "336"
ATI1    RESULT = "OK"   RESPONSE = "246"
ATI2    RESULT = "OK"   RESPONSE = "OK"
ATI3    RESULT = "OK"   RESPONSE = "WS-2814EM5"

Class 1 stuff...

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAE=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAE? RESULT = "OK"   RESPONSE = "0"
AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
AT+FTM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?        RESULT = "AT+FTS=?"     RESPONSE = ""
AT+FRS=?        RESULT = "AT+FRS=?"     RESPONSE = ""

Class 2 stuff... 

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS=2     RESULT = "OK"   RESPONSE = "OK"
AT+FCLASS?      RESULT = "OK"   RESPONSE = "2"
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FAA? RESULT = "OK"   RESPONSE = "0"
AT+FAXERR=?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FAXERR?      RESULT = "OK"   RESPONSE = "0"
AT+FBADLIN=?    RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADLIN?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADMUL=?    RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBADMUL?     RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBOR=?       RESULT = "OK"   RESPONSE = "0,1"
AT+FBOR?        RESULT = "OK"   RESPONSE = "0"
AT+FBUF=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FBUF?        RESULT = "OK"   RESPONSE = "1024,506,500,0"
AT+FBUG=?       RESULT = "OK"   RESPONSE = "0"
AT+FBUG?        RESULT = "OK"   RESPONSE = "0"
AT+FCIG=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCIG?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCQ? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FCR=?        RESULT = "OK"   RESPONSE = "0,1"
AT+FCR? RESULT = "OK"   RESPONSE = "0"
AT+FTBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDCC=?       RESULT = "OK"   RESPONSE = "(0,1),(0-5),(0-3),(0-2),(0),(0),(0),(0-7)"
AT+FDCC?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDCS=?       RESULT = "OK"   RESPONSE = "(0,1),(0-5),(0-3),(0-2),(0),(0),(0),(0-7)"
AT+FDCS?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDIS=?       RESULT = "OK"   RESPONSE = "(0,1),(0-5),(0-3),(0-2),(0),(0),(0),(0-7)"
AT+FDIS?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
AT+FDT=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FDT? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FECM=?       RESULT = "ERROR"        RESPONSE = "ERROR"
^[[AAT+FECM?    RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FET=?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FET? RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLID=?       RESULT = "OK"   RESPONSE = ""(20),(32-127)""
AT+FLID?        RESULT = "OK"   RESPONSE = "OK"
AT+FLNFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLNFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLPL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FLPL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FMDL?        RESULT = "OK"   RESPONSE = "WS-2814EM5"
AT+FMFR?        RESULT = "OK"   RESPONSE = "CIS"
AT+FMINSP=?     RESULT = "OK"   RESPONSE = "060"
AT+FMINSP?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FPHCTO=?     RESULT = "OK"   RESPONSE = "060"
AT+FPHCTO?      RESULT = "OK"   RESPONSE = "OK"
AT+FPTS=?       RESULT = "OK"   RESPONSE = "060"
AT+FPTS?        RESULT = "OK"   RESPONSE = "OK"
AT+FRBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FRBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FREV?        RESULT = "OK"   RESPONSE = "08-06-05"
AT+FSPL=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FSPL?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC=?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FTBC?        RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FVRFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FVRFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FWDFC=?      RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FWDFC?       RESULT = "ERROR"        RESPONSE = "ERROR"
AT+FK=? RESULT = "OK"   RESPONSE = "005"

--------------------------------------------------------


With this much information could anyone tell me how to get this modem to
do faxes the way they should be done ?

Many thanks in advance.
-- 
      \    /
       \/\/olfgang
            		      
                                   ___ 
Wolfgang Mettbach                 (O O)             Uekern 17
wmettbach@metronet.de            {  Y  }            33098 Paderborn (Germany)
===================================#=#========================================
Pray that there's intelligent life somewhere up in space because 
there's buggar all here down on Earth. (Monty Python)