HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Missing ':' separator ...





          Hello Tim,

On Tue, May 5, 1998 you wrote about the subject
'Re: flexfax: Missing ':' separator ...':

> ... 
> What about /var/spool/fax/etc/config ?
> If you have a line in there that starts with ModemClass
> comment it out and se if it helps.
> 

As a wellknown sailor would say now: "Blow me down!"

That was the trick! I don't know how, but it finally works. :-)

The strange thing is that the file /var/spool/fax/etc/config looks like
this now:

LogFacility:            daemon
CountryCode:            49
AreaCode:               5251
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
# ModemClass:		1

As you can see, there is (and there was before) a ":" exactly where it
should be. But after I commented out this line everything works.

Thanks a lot for your help!

Another question:

When the server sends a fax I get the following message:

   May  6 15:06:00 gateway FaxGetty[198]: ANSWER: Can not lock modem device

Nevertheless the faxes are send correctly. Is this an error I need to
worry about or can I safely ignore this message? What do I have to do to
get rid of this message? 


-- 
      \    /
       \/\/olfgang
            		      
                                   ___ 
Wolfgang Mettbach                 (O O)             Uekern 17
wmettbach@metronet.de            {  Y  }            33098 Paderborn (Germany)
===================================#=#========================================
"They make love at the drop of a hat." 
"Any hat."       (Geordi and Yar, "Justice", stardate 41255.6)




Project hosted by iFAX Solutions