flexfax: communication problem

["Feodor M. Snegov" <Fedor.Snegov@pobox.spbu.ru>]

Hello I amrunning HylaFAX v4.0 binary distribution on FreeBSD 2.2.5

Modem type:
USR Courier             US/Canada Intermal
Clock freq              20.16 mHz
Eprom                   256k
Supervisor date         04/29/96
DSP date                04/11/96
Supervisor rev.         6.5.0
DSP rev.                1.3.2

HylaFAX is installed to treat faxmodem as class 2.0 fax device
and is running as fax server accepting incoming fax telphone calls
I have treated it to receive fax from faxmachine Panasonic
but it everytime fails. Session tracing log is following:


Apr 24 22:48:15.38: [  269]: SESSION BEGIN 00000028 78121832349
Apr 24 22:48:15.39: [  269]: <-- [4:ATA\r]
Apr 24 22:48:37.89: [  269]: --> [4:+FCO]
Apr 24 22:48:37.89: [  269]: ANSWER: FAX CONNECTION
Apr 24 22:48:37.93: [  269]: RECV FAX: begin
Apr 24 22:48:39.68: [  269]: --> [27:+FTI:"         812 4230235"]
Apr 24 22:48:39.68: [  269]: REMOTE TSI "812 4230235"
Apr 24 22:48:40.01: [  269]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Apr 24 22:48:40.01: [  269]: REMOTE wants 9600 bit/s
Apr 24 22:48:40.01: [  269]: REMOTE wants page width 1728 pixels in 215 mm
Apr 24 22:48:40.01: [  269]: REMOTE wants unlimited page length
Apr 24 22:48:40.01: [  269]: REMOTE wants 3.85 line/mm
Apr 24 22:48:40.01: [  269]: REMOTE wants 1-D MR
Apr 24 22:48:40.16: [  269]: --> [2:OK]
Apr 24 22:48:40.16: [  269]: <-- [7:AT+FDR\r]
Apr 24 22:48:47.39: [  269]: --> [7:+FHS:72]
Apr 24 22:48:47.39: [  269]: REMOTE HANGUP: COMREC error (code 72)
Apr 24 22:48:47.39: [  269]: RECV FAX (00000028): recvq/fax00039.tif from 812 4230235, route to <unspecified>, 0 pages in 0:10
Apr 24 22:48:47.39: [  269]: RECV FAX: COMREC error
Apr 24 22:48:47.42: [  269]: RECV FAX (00000028): session with 812 4230235 terminated abnormally: COMREC error
Apr 24 22:48:47.42: [  269]: RECV FAX: bin/faxrcvd "recvq/fax00039.tif" "cuaa1" "00000028" "COMREC error"
Apr 24 22:48:48.14: [  269]: RECV FAX: end
Apr 24 22:48:48.24: [  269]: SESSION END


Modem DCE-DTE speed was installed 57600 bps
flow control: rtscts
Please write what parameters I should check or add to fix this comunication
problem.

Sinserely yours
Fedor Snegov.