![]() |
Shuvam Misra wrote: >| I am having problems receiving fax (mailing) coming from a certain fax >| server. The call is answered, the remote station sends data, but it >| seems like hylafax doesn' react (log follows). > >I have had a related problem for a long time. My Hylafax tells me that >it timed out waiting for a response from the modem. So, if I call up, >the phone rings twice, Hylafax takes it off hook, then records this >timeout error, then reinitialises the modem using faxgetty. In some >cases, I've had Hylafax not even going off-hook, just repeatedly telling >me that it is timing out waiting for a response from the modem. I use In my case, faxgetty notices that there is a inbound call, set the modem off hook and listens. The remote fax sends the DCS block three times while Hylafax does not react. I think, normally it should send a AT+FDR to confirm the remote parameters. But it doesn't. Then, after sending this block three times, the remote fax hangs up (+FHNG: 01). What could be the reason therefore. The parameters Hylafax is recieving seem ok to me: Apr 06 19:29:49.36: [ 3920]: --> [5:+FCON] Apr 06 19:29:49.37: [ 3920]: ANSWER: FAX CONNECTION Apr 06 19:29:49.39: [ 3920]: RECV FAX: begin Apr 06 19:29:51.37: [ 3920]: --> [29:+FTSI: "Via Fax "] Apr 06 19:29:51.37: [ 3920]: REMOTE TSI "Via Fax" Apr 06 19:29:51.37: [ 3920]: --> [22:+FDCS: 0,3,0,2,0,0,0,5] Apr 06 19:29:51.37: [ 3920]: REMOTE wants 9600 bit/s Apr 06 19:29:51.37: [ 3920]: REMOTE wants page width 1728 pixels in 215 mm Apr 06 19:29:51.37: [ 3920]: REMOTE wants unlimited page length Apr 06 19:29:51.37: [ 3920]: REMOTE wants 3.85 line/mm Apr 06 19:29:51.37: [ 3920]: REMOTE wants 1-D MR Apr 06 19:29:57.55: [ 3920]: --> [5:+FCON] The only difference to other successful inbound calls I can notice is that the TSI is non-numerical. Againt: Any hints how I could persuade Hylafax to accept these transmission? Thanks, Tom -- "Geistiger Horizont" ist der Abstand zwischen Hirn und Brett. http://mayerhofer.home.pages.de PGP available, ID 0x612E5F11