Re: flexfax: HylaFAX v4.0pl2 can't send ???

[Matthias.Apitz@SOFTCON.de]

Thierry Coopman wrote:
    
    I just installed the new patch level and now I can't send any fax out???
    
    Feb 17 17:37:42.34: [  362]: SESSION BEGIN 00022231 XXXXXXXXXXXXX
    Feb 17 17:37:42.34: [  362]: SEND FAX: JOB 7638 DEST XXXXXXXXX COMMID 00022231
    Feb 17 17:37:42.34: [  362]: DELAY 2600 ms
    Feb 17 17:37:44.95: [  362]: <-- [15:ATE0V1Q0S0=0H0\r]
    Feb 17 17:37:45.14: [  362]: --> [2:OK]
    Feb 17 17:37:45.14: [  362]: <-- [18:ATS8=2S7=60&D3&C1\r]
    Feb 17 17:37:45.34: [  362]: --> [2:OK]
    Feb 17 17:37:45.34: [  362]: <-- [12:AT+FCLASS=2\r]
    Feb 17 17:37:45.50: [  362]: --> [2:OK]
    Feb 17 17:37:45.50: [  362]: <-- [10:AT+FTBC=0\r]
    Feb 17 17:37:45.66: [  362]: --> [2:OK]
    Feb 17 17:37:45.66: [  362]: <-- [10:AT+FBOR=0\r]
    Feb 17 17:37:45.82: [  362]: --> [2:OK]
    Feb 17 17:37:45.82: [  362]: <-- [13:AT+FPHCTO=30\r]
    Feb 17 17:37:45.98: [  362]: --> [2:OK]
    Feb 17 17:37:45.98: [  362]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
    Feb 17 17:37:46.18: [  362]: --> [2:OK]
    Feb 17 17:37:46.18: [  362]: <-- [5:ATM0\r]
    Feb 17 17:37:46.34: [  362]: --> [2:OK]
    Feb 17 17:37:46.42: [  362]: <-- [12:AT+FCLASS=2\r]
    Feb 17 17:37:46.68: [  362]: --> [2:OK]
    Feb 17 17:37:46.68: [  362]: <-- [10:AT+FTBC=0\r]
    Feb 17 17:37:46.96: [  362]: --> [2:OK]
    Feb 17 17:37:46.96: [  362]: <-- [10:AT+FBOR=0\r]
    Feb 17 17:37:47.24: [  362]: --> [2:OK]
    Feb 17 17:37:47.24: [  362]: <-- [13:AT+FPHCTO=30\r]
    Feb 17 17:37:47.52: [  362]: --> [2:OK]
    Feb 17 17:37:47.52: [  362]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
    Feb 17 17:37:47.80: [  362]: --> [2:OK]
    Feb 17 17:37:47.80: [  362]: <-- [31:AT+FLID="Belgacom - Skynet nv"\r]
    Feb 17 17:37:48.08: [  362]: --> [2:OK]
    Feb 17 17:37:48.08: [  362]: DIAL 080020406
    Feb 17 17:37:48.08: [  362]: <-- [17:ATDT0,XXXXXXXXX@\r]
    Feb 17 17:39:00.60: [  362]: --> [8:+FHNG: 4]
    Feb 17 17:39:00.60: [  362]: REMOTE HANGUP: Ringback detected, no answer (timeout) (code 4)
    Feb 17 17:39:00.60: [  362]: SEND FAILED: Ringback detected, no answer (timeout)
    Feb 17 17:39:00.60: [  362]: <-- [5:ATH0\r]
    Feb 17 17:39:01.16: [  362]: --> [2:OK]
    Feb 17 17:39:01.16: [  362]: SESSION END
    
    All faxes are returned like that. Is there something I have to reconfigure?????

I can't see any problem in the above sessionTrace that the HylaFAX
faxsend(1M) could solve itself. Try removing the "@" from the
ModemDialCmd:

Do you still have an old (pl1) sessionTrace for the *same*
destination number? Please show it to me directly.

	matthias