flexfax: CoverPage Send problems

[Arjan Knepper <arjan@jak.nl>]

Hello,

I have some problems at creating my own faxcover.
I created a faxcover by use of Adobe Illustrator on a
WinNT40-box. I created a ps file by use of a postscript printer
(Apple laseWriter 16/600 PS). I faxed this file from a unix-box
with Hylafax to another fax-machine, this worked well. But after
ediiting the file as described in the archives to create a new
faxcover-template the sendfax program return a errror on
converting/creating a faxcover.
To solve this I saved the Illustrator file as PDF and converted
it on the unix-box to a PS file using the PDF2PS filter. Again i
tried to send the generated PS file with hylafax and this worked
well.
I editted this PS file to create a faxcover template. But when I
use this faxcover hylafax/sendfax/makecover doesn,t complain
about anything, a faxcover is generated and the fax is send
away..... but reviewing the fax log file it says:
---------------SNIP-------------
Feb 05 22:32:25.48: [12666]: REMOTE best rate 9600 bit/s
Feb 05 22:32:25.48: [12666]: REMOTE max page width 1728 pixels in
215 mm
Feb 05 22:32:25.48: [12666]: REMOTE max unlimited page length
Feb 05 22:32:25.48: [12666]: REMOTE best vres 7.7 line/mm
Feb 05 22:32:25.48: [12666]: REMOTE best format 1-D MR
Feb 05 22:32:25.48: [12666]: REMOTE best 0 ms/scanline
Feb 05 22:32:25.48: [12666]: USE 9600 bit/s
Feb 05 22:32:25.48: [12666]: USE 0 ms/scanline
Feb 05 22:32:25.48: [12666]: SEND file "docq/doc20.cover;00"
Feb 05 22:32:25.48: [12666]: Modem does not support document page
width, max page width 2432 pixels, image width 1687 pixels
Feb 05 22:32:25.48: [12666]: <-- [5:ATH0\r]
Feb 05 22:32:25.74: [12666]: --> [9:+FHNG: 20]
Feb 05 22:32:25.74: [12666]: REMOTE HANGUP: Unspecified Transmit
Phase B error (
code 20)
Feb 05 22:32:26.31: [12666]: --> [2:OK]
Feb 05 22:32:26.33: [12666]: SESSION END
--------------------------------
What is the problem: the page width or the Phase B error? And
what do I have to do to resolve this? And isn't there a more
simple way to create faxcover-templates?

T.I.A.
Arjan Knepper
Arjan@jak.nl