Re: flexfax: Multipurpose call routing devices!

[root <root@carsonsofhp.com>]

Here is the log from one of the calls that says it's busy. I called the
Salesman with this fax machine and he said it's a Panasonic model that has
the fax, answering machine, and telephone integrated into one machine.

Jan 22 01:03:58.37: [16946]: SESSION BEGIN 00010892 xxxxxxxxxxx
Jan 22 01:03:58.37: [16946]: SEND FAX: JOB 7323 DEST xxxxxxxxxxx COMMID 
00010892
Jan 22 01:03:58.37: [16946]: DELAY 2600 ms
Jan 22 01:04:01.10: [16946]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 22 01:04:01.33: [16946]: --> [2:OK]
Jan 22 01:04:01.33: [16946]: <-- [28:ATS8=2S7=90S10=255&E5&D3&C1\r]
Jan 22 01:04:01.53: [16946]: --> [2:OK]
Jan 22 01:04:01.53: [16946]: <-- [12:AT+FCLASS=2\r]
Jan 22 01:04:01.69: [16946]: --> [2:OK]
Jan 22 01:04:01.69: [16946]: <-- [10:AT+FTBC=0\r]
Jan 22 01:04:01.85: [16946]: --> [2:OK]
Jan 22 01:04:01.85: [16946]: <-- [10:AT+FBOR=0\r]
Jan 22 01:04:02.01: [16946]: --> [2:OK]
Jan 22 01:04:02.01: [16946]: <-- [13:AT+FPHCTO=30\r]
Jan 22 01:04:02.17: [16946]: --> [2:OK]
Jan 22 01:04:02.17: [16946]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Jan 22 01:04:02.37: [16946]: --> [2:OK]
Jan 22 01:04:02.37: [16946]: <-- [5:ATM0\r]
Jan 22 01:04:02.53: [16946]: --> [2:OK]
Jan 22 01:04:02.53: [16946]: <-- [12:AT+FCLASS=2\r]
Jan 22 01:04:02.77: [16946]: --> [2:OK]
Jan 22 01:04:02.77: [16946]: <-- [10:AT+FTBC=0\r]
Jan 22 01:04:03.05: [16946]: --> [2:OK]
Jan 22 01:04:03.05: [16946]: <-- [10:AT+FBOR=0\r]
Jan 22 01:04:03.29: [16946]: --> [2:OK]
Jan 22 01:04:03.29: [16946]: <-- [13:AT+FPHCTO=30\r]
Jan 22 01:04:03.53: [16946]: --> [2:OK]
Jan 22 01:04:03.53: [16946]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Jan 22 01:04:03.81: [16946]: --> [2:OK]
Jan 22 01:04:03.81: [16946]: <-- [31:AT+FLID="Carson's of High Poi"\r]
Jan 22 01:04:04.09: [16946]: --> [2:OK]
Jan 22 01:04:04.09: [16946]: DIAL 18024471414
Jan 22 01:04:04.09: [16946]: <-- [17:ATDTxxxxxxxxxxx@\r]
Jan 22 01:04:34.77: [16946]: --> [4:BUSY]
Jan 22 01:04:34.77: [16946]: SEND FAILED: Busy signal detected
Jan 22 01:04:34.77: [16946]: SEND FAILED: Busy signal detected; too many attempts to dial
Jan 22 01:04:34.77: [16946]: <-- [5:ATH0\r]
Jan 22 01:04:39.77: [16946]: MODEM <Timeout>
Jan 22 01:04:39.89: [16946]: SESSION END

Thanks again for any and all help!

Marty Kirkman