HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Phase B error (code 70)



I am wondering if anybody has any clues as to why I receive an 'Unspecified
Receive Phase B error (code 70)' when trying to send to my Zyxel 2864 fax
modem. What does code 70 mean? I have tried to find out what code 70 is -
My manual just says refer to TIA-592 for details but it's not something I
have readily at hand :-(

This error appears (apparently) regardless of the the typ of fax trying to
send. I have included a trace of what is happening.

Dec 16 10:27:40.87: [14127]: SESSION BEGIN 00030185 4643500001
Dec 16 10:27:40.87: [14127]: <-- [4:ATA\r]
Dec 16 10:27:51.90: [14127]: --> [11:CONNECT FAX]
Dec 16 10:27:51.91: [14127]: <-- [11:AT&H4S18=5\r]
Dec 16 10:27:51.91: [14127]: --> [4:+FCO]
Dec 16 10:27:55.88: [14127]: --> [26:+FTI:+46043512635         ]
Dec 16 10:27:55.89: [14127]: --> [20:+FCS:1,5,0,2,0,0,0,5]
Dec 16 10:27:55.89: [14127]: --> [2:OK]
Dec 16 10:27:55.89: [14127]: ANSWER: FAX CONNECTION
Dec 16 10:27:55.89: [14127]: MODEM input buffering enabled
Dec 16 10:27:57.88: [14127]: MODEM setInputBuffer::ioctl(SIOC_ITIMER):
Timer expired
Dec 16 10:27:57.89: [14127]: RECV FAX: begin
Dec 16 10:28:03.32: [14127]: --> [7:+FHS:70]
Dec 16 10:28:03.33: [14127]: REMOTE HANGUP: Unspecified Receive Phase B
error (code 70)
Dec 16 10:28:03.33: [14127]: --> [2:OK]
Dec 16 10:28:03.33: [14127]: RECV FAX: Unspecified Receive Phase B error
Dec 16 10:28:03.34: [14127]: RECV FAX: end
Dec 16 10:28:03.34: [14127]: SESSION END


Thanks
Hans Christiansen

hans@ljungbergs.se

Ljungbergs Tryckeri AB                Tel. +46 435 120 40
Box 100                               Fax. +46 435 71 17 26
S-264 22 Klippan                      Mob. +46 70 518 26 49
Sweden




Project hosted by iFAX Solutions