HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
newbie problem
I really need tips installing hylafax on a SCO5.0.4 box. Got binaries
from ftp.sgi.com... everything installs as instructed. Modem is probed
correctly
so everything should work..
1) about 20 times I've added in new fax with faxaddmodem but when I run
faxstat -s all I get is
# ./faxstat
HylaFAX scheduler on chrysler: Running
and no line about modem tty2A....
yes, I did run $./faxmodem tty2A after running faxaddmodem
2) mail sent back complains about ghostcript. Ghostscript makes pretty
pictures
(../examples/tiger.ps) so that seems to eliminate source... but here's
mail ->
Your facsimile job to 4836650 was not sent because document conversion
to facsimile failed. The output from the converter program was:
Error: /typecheck in --restore--
Operand stack:
-savetype- /Courier-Bold
Execution stack:
%interp_exit --nostringval-- --nostringval-- --nostringval--
false --no
stringval-- --nostringval-- --nostringval--
Dictionary stack:
537/547 0/20 6/200
Ghostscript: Unrecoverable error, exit code 1
Check any PostScript documents for non-standard fonts and invalid
constructs.
---- Unsent job status ----
Destination: 4836650
JobID: 5
GroupID: 5
Sender: Superuser
Mailaddr: root@chrysler
Submitted From: localhost
Page Width: 215 (mm)
Page Length: 279 (mm)
Resolution: 98 (lpi)
Status: Error: /typecheck in --restore--
Operand stack:
-savetype- /Courier-Bold
Execution stack:
%interp_exit --nostringval-- --nostringval-- --nostringval--
false --no
stringval-- --nostringval-- --nostringval--
Dictionary stack:
537/547 0/20 6/200
Ghostscript: Unrecoverable error, exit code 1
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)
---- Documents submitted for transmission ----
The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.
Filename Size Type
docq/doc5.cover 10894 PostScript cover page
docq/doc5.ps.5 5776 PostScript
3) Is there a way to preserve HP laserjet graphics embedded in file?
I have nice shading and layout I would like preserved or do I have to
rewrite output as postscript instead of PCL3?
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GIT d s: a C+++ UC++++ UB+++ P+ L+ E-- W+++ N++ o+ K- w+ O- M- V-- PS
PE+ Y PGP- t++ 5 X R- tv++ b++ DI++++ D+ G e+* h---- r+++ y++++
------END GEEK CODE BLOCK------