flexfax: 550 /tmp/doc22.ps Not Owner - again.

[Aleksandar Simic <ASimic@compuserve.com>]

Hello Everybody,

Thanks to people that replied to initial question regarding this problem. 
Unfortunately all the tricks I've tried so far didn't work (went through
the
archives etc.) I'm getting fairly desperate at this time, hence another
attempt to see if anyone out there has cracked this one.  Here we go:

Environment: HP-UX 10.01 gcc 2.7.2.2 HylaFAx v4.0pl1

Problem: can not send fax out. Below is the output of communication that
goes on. It does not matter if I'm trying t osend fax as fax user, root, or
any other user for that matter. 

Anybody has any idea ? Thanks a million.
Aleks

Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 marge server (HylaFAX (tm) Version 4.0pl1) ready.
-> USER uucp
230 User uucp logged in.
match against (..., 512)
rule: offset 0 string = "%!" -- failed (comparison)
rule: offset 0 short = 0x4d4d -- failed (comparison)
rule: offset 0 short = 0x4949 -- failed (comparison)
rule: offset 0 short = 0x1da -- failed (comparison)
rule: offset 0 short = 0x1f1e -- failed (comparison)
rule: offset 0 short = 0x1f9d -- failed (comparison)
rule: offset 0 short = 0x506 -- failed (comparison)
rule: offset 0 short = 0x5343 -- failed (comparison)
rule: offset 0 short = 0xf702 -- failed (comparison)
rule: offset 0 string = "GIF" -- failed (comparison)
rule: offset 0 long = 0x59a66a95 -- failed (comparison)
rule: offset 0 string = "x T psc" -- failed (comparison)
rule: offset 0 string = "begin" -- failed (comparison)
rule: offset 0 string = "xbtoa" -- failed (comparison)
rule: offset 0 string = "P1" -- failed (comparison)
rule: offset 0 string = "P2" -- failed (comparison)
rule: offset 0 string = "P3" -- failed (comparison)
rule: offset 0 string = "P4" -- failed (comparison)
rule: offset 0 string = "P5" -- failed (comparison)
rule: offset 0 string = "P6" -- failed (comparison)
rule: offset 0 string = "WNGZWZSS" -- failed (comparison)
rule: offset 0 string = "#Inventor V" -- failed (comparison)
rule: offset 0 ascii = -- success (result postscript, rule "%F/textfmt -B
-f Courier-Bold -p 11 -s %s >%o <%i")
CONVERT "/usr/local/lib/fax/textfmt -B -f Courier-Bold -p 11 -s default
>/tmp//faxsnda10953 <./aa.aa"
Apply DisplayNumber rules to "9619443"
--> return result "9619443"
-> TYPE I
200 Type set to Image.
SEND compressed data, 6711 bytes
-> PORT 127,0,0,1,8,141
200 PORT command successful.
-> MODE Z
200 Mode set to ZIP.
-> STOT
150 FILE: /tmp/doc22.ps (Opening new data connection).
SEND 2708 bytes transmitted (2.5x compression)
226 Transfer complete (FILE: /tmp/doc22.ps).
-> JNEW
200 New job created: jobid: 14 groupid: 14.
-> JPARM FROMUSER "uucp"
213 FROMUSER set to "uucp".
-> JPARM LASTTIME 000300
213 LASTTIME set to 000300.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "9619443"
213 DIALSTRING set to "9619443".
-> JPARM NOTIFYADDR "uucp@marge"
213 NOTIFYADDR set to "uucp@marge".
-> JPARM VRES 98
213 VRES set to 98.
-> JPARM PAGEWIDTH 215
213 PAGEWIDTH set to 215.
-> JPARM PAGELENGTH 279
213 PAGELENGTH set to 279.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc22.ps
550 /tmp/doc22.ps: Not owner.