RE: T.30 errors on answer and - RE: flexfax: hylafax 4.0pl1 can

[Don Thompson <don@drumhill.prestel.co.uk>]

I've spoken to MultiTech, they're mailing me some new PROM's. at rev. 0316A. My home based MT2834ZDXK is a higher rev. (0313A) than the office units (0311) and
today I tested it out successfully with one of the problematic correspondents. Assuming that the increments to 0316A don't undo any of the good work between rev. 0311
and 0313A it looks like the end of the issue.

>>Reply to your message of 12/3/97 5:56 PM
	>>I would start by upgrading my firmware realease, the newest I know is
	>>at+fmfr?
	>>+FMFR=Multi-Tech Systems
	>>
	>>OK
	>>at+FMDL?
	>>+FMDL=MT2834ZDX
	>>
	>>OK
	>>ati1
	>>0316A 
	>>
	>>NORTH AMERICAN 
	>>
	>>OK
	>>ati4
	>>02-26-1997 14:57
	>>
	>>A second and less desirable choice is to use class 1instead of class 
	>>2, though I am not certain that the MT supports it.
	>>
	>>Julio
	>>
	>>Note: let me know the end of the story please, thanks
	>>
	>>> To:            perrot@francenet.fr,
	>>>                flexfax@sgi.com
	>>> From:          Don Thompson <don@drumhill.prestel.co.uk>
	>>> Subject:       T.30 errors on answer and - RE: flexfax: hylafax 4.0pl1 can't send fax
	>>to certain fax machines
	>>> Date:          Wed, 03 Dec 1997 10:30:25 +0000
	>>
	>>> I'd appreciate hearing from anyone who has any experience of solving T.30
	>>timeouts. I'm running MultiTech MT2834ZDXI modem, with firmware rev.0311. The
	>>host system is Solaris (Sparc) 2.5.1 with Hyla
	>>> 
	>>> I'getting  a lot of the following errors on receive jobs.
	>>> 
	>>> Dec 02 14:50:50.39: [14951]: SESSION BEGIN 00000967 441232732712
	>>> Dec 02 14:50:50.40: [14951]: <-- [4:ATA\r]
	>>> Dec 02 14:51:05.70: [14951]: --> [5:+FCON]
	>>> Dec 02 14:51:05.70: [14951]: ANSWER: FAX CONNECTION
	>>> Dec 02 14:51:05.70: [14951]: RECV FAX: begin
	>>> Dec 02 14:51:49.90: [14951]: --> [8:+FHNG:74]
	>>> Dec 02 14:51:49.90: [14951]: REMOTE HANGUP: T.30 T1 timeout after EOM
	>>received (
	>>> code 74)
	>>> Dec 02 14:51:50.44: [14951]: --> [2:OK]
	>>> Dec 02 14:51:50.44: [14951]: RECV FAX: T.30 T1 timeout after EOM received
	>>> Dec 02 14:51:50.47: [14951]: RECV FAX: end
	>>> Dec 02 14:51:50.47: [14951]: SESSION END
	>>> 
	
 >< extraneous msg cut