Re: flexfax: Problem : any idea ?

[Didier Gautheron <dgautheron@magic.fr>]

Alessandro Coppelli wrote:
> 
>  Hi to all.
> 
>   SCENARIO
>   ========
> 
>    Linux box with USR Sportster modem/fax and latest Hylafax
> 
>  PROBLEM
>  =======
> 
> 
> 
> >Your facsimile job to 0,,055,367583 failed because:
> >    Unspecified Transmit Phase C error; too many attempts to send
> >
> >    ---- Transcript of session follows ----
> >
> >May 21 13:12:41.90: [25709]: SESSION BEGIN 00000021 39055367583
> >May 21 13:12:41.92: [25709]: SEND FAX: JOB 75 DEST 0,,055,367583 COMMID

> >May 21 13:12:44.94: [25709]: <-- [5:ATM0\r]

> >May 21 13:13:16.60: [25709]: --> [2:OK]
> >May 21 13:13:16.60: [25709]: TRAINING succeeded

> >May 21 13:13:49.40: [25709]: SEND 1D RTC
> >May 21 13:13:49.41: [25709]: SEND end page
> >May 21 13:15:09.40: [25709]: <-- [9:AT+FTH=3\r]
> >May 21 13:15:11.95: [25709]: --> [0:]
> >May 21 13:15:11.96: [25709]: SEND FAILED: Unspecified Transmit Phase C error;
> too many attempts to send
> >May 21 13:15:11.96: [25709]: <-- [5:ATH0\r]
> >May 21 13:15:16.95: [25709]: MODEM <Timeout>
> >May 21 13:15:16.97: [25709]: SESSION END
> >
> >    ---- Unsent job status ----
> 
>  What happaned ? Any idea ?
> 
>  Alessandro
Yea the other fax says you good bye (actually it hangs) after training
succeeded and before  SEND end of page. Remember faxes are half duplex
beasts. You could use ATM2 for sound and you'll hear it, when remote 'll
hang, sound will be  louder and you'll get the busy tone, with a little
practice it's easy - don't worry you'll qet the practice quickly :( -.
Ok.
Did you always have this problem with the same remote?
We had similar trouble in the past.
We had a little pause before sending the page (the idea's not from me)
and problems (at least this one) get away.

Didier.