![]() |
Hello! I'm configuring a send-only facsimile server with the following configuration: Pentium 66 Linux Slackware 2.0.0 Sendmail 8.7.5 Hylafax 4.0pl1 Dirk-faxmailer script I've some doubts about my configuration: * My fax configuration, I run "faxgetty" on the "rc.local" file with the following command : faxgetty cua1& and this is the "message" file contents: Jul 15 11:55:31 haddock HylaFAX[106]: HylaFAX INET Protocol Server: restarted. Jul 15 11:55:31 haddock HylaFAX[106]: HylaFAX Old Protocol Server: restarted. Jul 15 11:55:31 haddock HylaFAX[106]: HylaFAX SNPP Protocol Server: restarted. Jul 15 11:55:33 haddock FaxQueuer[108]: HylaFAX (tm) Version 4.0pl1 Jul 15 11:55:33 haddock FaxQueuer[108]: Copyright (c) 1990-1996 Sam Leffler Jul 15 11:55:33 haddock FaxQueuer[108]: Copyright (c) 1991-1996 Silicon Graphics, Inc. Jul 15 11:55:34 haddock FaxGetty[109]: OPEN /dev/cua1 Jul 15 11:55:39 haddock FaxGetty[109]: MODEM USR Sportster 14,400/Fax and when I execute the "faxstat" program the system returns : HylaFAX scheduler on haddock.urgelia.ct: Running Modem cua1 (+34.3.455.52.65): No status (empty file) is this correct? * After sending a mail, hylafax begin to run with the following steps: Jul 15 12:05:18 haddock sendmail[181]: MAA00181: from=root, size=43, class=0, pri=30043, nrcpts=1, msgid=<199707151005.MAA00181@haddock.urgelia.ct>, relay=root@localhost Jul 15 12:05:21 haddock HylaFAX[188]: USER root Jul 15 12:05:21 haddock HylaFAX[188]: TYPE I Jul 15 12:05:22 haddock HylaFAX[188]: PORT 127.0.0.1;2052 Jul 15 12:05:22 haddock HylaFAX[188]: MODE Z Jul 15 12:05:22 haddock HylaFAX[188]: STOT Jul 15 12:05:22 haddock sendmail[182]: MAA00181: to=fax.3118695, ctladdr=root (0/0), delay=00:00:04, xdelay=00:00:04, mailer=fax, relay=fax, stat=Sent and nothing seems to append. Could anyone take a look at this message and tell me something about that?. Thank you very much. -- Bye, Ramon Arxer i Galabert e-mail : arxer@bcn.servicom.es ramon25@casal.upc.es WWW : http://yi.com/home/ArxerRamon http://casal.upc.es/~ramon25