win95 PS-file problems

["Karel.DeBruyne" <dbruyne@uia.ua.ac.be>]

Hi,

Setup:
hylafax-v4.0pl1 on Pentium running Linux  (Redhat 4.0)
compiled with gcc 2.7.2.1
gs : Aladdin Ghostscript 3.33 (4/10/1995)

Problem :
My outgoing fax service is doing a great job. But only for ASCII
documents. Postscript generated with pcps of xv is fine too, but any
PS-file generated on a Win95 PC gives me problems...
The strange thing is, the PS file seems to be converted to fax-format by
gs, but when my modem tries to contact the other side, the modems don't
indicate Carrier Detect ! 
When I try to convert the fax temporary file to PS (using the fax2ps tool)
and then try to fax this postscript file, it works !

In the log file, I get the following messages :
May 29 16:54:26.31: [28181]: REMOTE best rate 14400 bit/s
May 29 16:54:26.31: [28181]: REMOTE max page width 2432 pixels in 303 mm
May 29 16:54:26.31: [28181]: REMOTE max unlimited page length
May 29 16:54:26.31: [28181]: REMOTE best vres 7.7 line/mm
May 29 16:54:26.31: [28181]: REMOTE best format 2-D MR
May 29 16:54:26.31: [28181]: REMOTE best 0 ms/scanline
May 29 16:54:26.31: [28181]: USE 14400 bit/s
May 29 16:54:26.31: [28181]: USE 0 ms/scanline
May 29 16:54:26.31: [28181]: SEND file "docq/doc2.ps;01"
May 29 16:54:26.32: [28181]: Modem does not support document page width,
max page width 2432 pixels, image width 1734 pixels
May 29 16:54:26.32: [28181]: <-- [5:ATH0\r]
May 29 16:54:26.63: [28181]: --> [2:OK]
May 29 16:54:26.63: [28181]: SESSION END

Has anyone got an idea what is wrong with my setup?

Thanks !

Karel
=======================================================================
Karel De Bruyne
System/Network Manager                      phone      + 32 3 820 22 04
UIA - Computer Centre                       fax        + 32 3 820 22 49
Universiteitsplein 1 - B0.12                email  dbruyne@uia.ua.ac.be
B 2610 Wilrijk - Belgium              http://www.uia.ua.ac.be/u/dbruyne
=======================================================================